SAO-display

sbadger·SAO-display

SAO-display PCB layout, top view — open source board by sbadger

About the SAO-display PCB

SAO-display is an open source PCB design by sbadger, published on GitHub. It is a 2-layer board measuring 210 × 297 mm, with 82 components from 11 distinct parts.

Other key parts include the MIC5219-3.3YM5. By type, the board carries 42 connectors, 10 capacitors, 5 ICs, 3 resistors, 1 switch and 1 diode.

It belongs with the displays & leds designs in this gallery.

From the project

Display board for SAO

My goals for this project create an A4 size display board with a 4x5 grid of SAO connectors I2c connectors should be connected so the SAO's can talk I2c connectoer near incoming power connector to tap into the bus I2c bus and clock should be easily connected or disconnected through hsolder brige or header expose the GPIO pins to an unpopulated header to enable if needed mounting holes in corners LED power light 3.3V reguator for each row

Main components on the SAO-display

SAO-display bill of materials (BOM)

82 components, 11 distinct parts.

QtyPartRefs
5
MIC5219-3.3YM5
U1, U2, U3, U4, U5
1
5V
J1
1
~
J2
40
Conn_01x01_Pin
J3, J4, J5, J6, J7, J8, J9, J10 +32
20
SAO
SAO-00, SAO-01, SAO-02, SAO-03, SAO-04, SAO-05, SAO-06, SAO-07 +12
1
SW_SPDT
SW1
1
LED
D1
5
470pF
C1, C2, C3, C4, C5
5
2.2uF tantalum
C6, C7, C8, C9, C10
1
330
R1
2
4.7K
R2, R3

SAO-display design files

The KiCad project lives in the sbadger/SAO-display repository on GitHub; these links point at the commit this page was built from.

SAO-display: common questions

How big is the SAO-display PCB?

The SAO-display measures 210 × 297 mm, has 2 copper layers and is 1.6 mm thick.

How many components are on the SAO-display?

82 components, from 11 distinct parts. The full bill of materials is listed on this page.

Where can I download the SAO-display design files?

From the sbadger/SAO-display repository on GitHub, which has the KiCad layout and the schematic; the links under Design files point to each one.

Can I use the SAO-display design in my own project?

The repository has no license, so all rights stay with sbadger. Use it as a reference, and ask the author before reusing the design.

Similar boards