MicroBot - connector board
scimusmn·tsck-microbots·hardware/MicroBot - connector board/MicroBot - connector board.kicad_pcb
About the MicroBot - connector board
MicroBot - connector board is an open source PCB design by scimusmn, published on GitHub. It is a 2-layer board measuring 88.9 × 76.8 mm, with 31 components from 17 distinct parts.
Other key parts include the L9110_H-Bridge, R-78C12-1.0 and OKI-78SR-5_1.5-W36-C. By type, the board carries 8 capacitors, 5 connectors, 5 resistors, 4 ICs, 2 switches and 1 module.
From the project
An interactive near-future medical robotics game.
Main components on the MicroBot - connector board
MicroBot - connector board bill of materials (BOM)
31 components, 17 distinct parts.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | L9110_H-Bridge | DIP-8_W7.62mm_Socket | U1 |
| 2 | R-78C12-1.0 | Converter_DCDC_RECOM_R-78E-0.5_THT | U2, U3 |
| 1 | OKI-78SR-5_1.5-W36-C | Converter_DCDC_Murata_OKI-78SR_Vertical | U5 |
| 1 | Motor_DC | TerminalBlock-2_P5.08mm_small | M1 |
| 1 | SMM_Mega_Shield_Connector | PinHeader_2x20_P2.54mm_Vertical | J0 |
| 1 | X_Axis_Stepper_Controller | TerminalBlock_bornier-6_P5.08mm | J1 |
| 1 | Y_Axis_Stepper_Controller | TerminalBlock_bornier-6_P5.08mm | J2 |
| 1 | gen4-IB | PinSocket_1x05_P2.54mm_Horizontal | J3 |
| 1 | 24VDC | TerminalBlock-2_P5.08mm_large | J4 |
| 1 | Buzzer | TerminalBlock-2_P5.08mm_small | BZ1 |
| 2 | Limit Switch | TerminalBlock-2_P5.08mm_small | SW-X1, SW-Y1 |
| 4 | SW_Push | TerminalBlock-2_P5.08mm_small | SW_Down1, SW_Left1, SW_Right1, SW_Up1 |
| 1 | LED | LED_D3.0mm | D1 |
| 4 | 100nF | C_Disc_D3.0mm_W2.0mm_P2.50mm | C1, C2, C3, C4 |
| 4 | 10µF | CP_Radial_D4.0mm_P1.50mm | C5, C6, C7, C8 |
| 4 | 1K | Resistor_L6.3mm_D2.5mm_P10.16mm_Horizontal | R1, R2, R3, R4 |
| 1 | R | Resistor_L6.3mm_D2.5mm_P10.16mm_Horizontal | R5 |
MicroBot - connector board design files
The KiCad project lives in the scimusmn/tsck-microbots repository on GitHub; these links point at the commit this page was built from.
MicroBot - connector board: common questions
How big is the MicroBot - connector board?
The MicroBot - connector board measures 88.9 × 76.8 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the MicroBot - connector board?
31 components, from 17 distinct parts. The full bill of materials is listed on this page.
Where can I download the MicroBot - connector board design files?
From the scimusmn/tsck-microbots repository on GitHub, which has the KiCad layout and the schematic; the links under Design files point to each one.
Can I use the MicroBot - connector board design in my own project?
The repository has no license, so all rights stay with scimusmn. Use it as a reference, and ask the author before reusing the design.