13 open source boards using the OKI-78SR-5_1.5-W36-C
Real designs built with the OKI-78SR-5_1.5-W36-C, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.
ESP32
ESP32 16
computergeek1507
142.1 × 90.8 mm91 parts2LCERN-OHL-1.210Raspberry Pi Zero (W) uHAT Template Board
romi
65 × 50.1 mm19 parts2LGPL-3.04STM32
RS485-Gassensor
Sarbf1
92 × 46 mm71 parts2LApache-2.03- schematic only · 63 parts
Esp32seismo
vpatoka
63 partsNo license1 Main unit
HyFiVeUser
55 × 72.1 mm128 parts4LCC-BY-SA-4.00ESP32
COFFEE MAKER
liammchugh
131.4 × 99.7 mm55 parts2LNo license0MicroBot - connector board
scimusmn
88.9 × 76.8 mm31 parts2LNo license0ESP32
Bgc syringe cycler
ravi-nataraj
60 × 40 mm15 parts2LMIT0STM32
RS485-Gassensor-Dev
Sarbf1
92 × 62 mm71 parts2LApache-2.030.2
aep
74.5 × 120 mm77 parts4LNo license0Cablebot power
romi
80 × 21.7 mm12 parts2LGPL-3.040.3
aep
74.6 × 120 mm77 parts4LNo license0BBB16 Expansion
computergeek1507
99.5 × 88.5 mm40 parts2LCERN-OHL-S-2.078
How designs wire the OKI-78SR-5_1.5-W36-C
Read from the KiCad layouts of 9 open source designs, one per repository: what each pin of the OKI-78SR-5_1.5-W36-C connects to, and the resistors, capacitors and other passives placed on it.
- The OUT pin is tied to 5V on 82% of them (a signal on 2).
- The IN pin is tied to 12V on 73% of them (a signal on 3).
| Pin | Connected to | Parts on the pin |
|---|---|---|
| INpin 1 | Connected to: 12V 73% · a signal 27% | — |
| GNDpin 2 | Connected to: GND 100% | — |
| OUTpin 3 | Connected to: 5V 82% · a signal 18% | — |
Connections count pins, parts count designs; values in brackets are how many parts had that value. Designs read include BBB16 Expansion by computergeek1507, ESP32 16 by computergeek1507, Raspberry Pi Zero (W) uHAT Template Board by romi and RS485-Gassensor by Sarbf1.
The OKI-78SR-5_1.5-W36-C in open source designs
The gallery holds 13 open source boards using the OKI-78SR-5_1.5-W36-C from 10 GitHub repositories; a typical one measures about 84.5 × 74.5 mm and carries around 63 components.
75% are two-layer designs, the rest use four layers or more, and 62% carry an open source license.
The most starred is BBB16 Expansion by computergeek1507.
What boards using the OKI-78SR-5_1.5-W36-C are built for
OKI-78SR-5_1.5-W36-C: common questions
Where can I find a OKI-78SR-5_1.5-W36-C reference design?
Each of the 13 boards on this page is a real design using the OKI-78SR-5_1.5-W36-C. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.
How is the OKI-78SR-5_1.5-W36-C OUT pin connected?
The OUT pin is tied to 5V on 82% of them (a signal on 2). Counted from the KiCad layouts of 9 open source designs using the OKI-78SR-5_1.5-W36-C.
How is the OKI-78SR-5_1.5-W36-C IN pin connected?
The IN pin is tied to 12V on 73% of them (a signal on 3). Counted from the KiCad layouts of 9 open source designs using the OKI-78SR-5_1.5-W36-C.
Which microcontrollers do boards using the OKI-78SR-5_1.5-W36-C use?
Most are built on ESP32 (3) and STM32 (2).
How big is a typical board using the OKI-78SR-5_1.5-W36-C?
The median is 84.5 × 74.5 mm, and 75% are two-layer designs.
What is the most popular open source board using the OKI-78SR-5_1.5-W36-C?
By GitHub stars, BBB16 Expansion by computergeek1507, with 78 stars.
Can I simulate one of these boards using the OKI-78SR-5_1.5-W36-C before building it?
Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.