X83-kb-1
About the X83-kb-1 PCB
X83-kb-1 is an open source STM32 PCB design by scottcjx, published on GitHub under the GPL-3.0 license. It is a 2-layer board measuring 315 × 130 mm, with 180 components from 7 distinct parts.
Its main chip is the STM32F072RBTx, from the STM32 family. Other key parts include the AMS1117-3.3. By type, the board carries 83 switches, 83 diodes, 10 capacitors, 2 ICs and 2 resistors.
It belongs with the keyboards designs in this gallery.
Main components on the X83-kb-1
X83-kb-1 bill of materials (BOM)
180 components, 7 distinct parts.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | AMS1117-3.3 | SOT-223-3_TabPin2 | U101 |
| 1 | STM32F072RBTx | LQFP-64_10x10mm_P0.5mm | U102 |
| 83 | ~ | SW_OPT_MX | SW201, SW202, SW203, SW204, SW205, SW206, SW207, SW208 +75 |
| 83 | D | D_SMA | D201, D202, D203, D204, D205, D206, D207, D208 +75 |
| 3 | 2u2 | C_0805_2012Metric | C101, C102, C109 |
| 7 | 100n | C_0603_1608Metric | C103, C104, C105, C106, C107, C108, C110 |
| 2 | 10K | R_0603_1608Metric | R101, R102 |
X83-kb-1 design files
The KiCad project lives in the scottcjx/x83-keyboard repository on GitHub; these links point at the commit this page was built from.
- LayoutHDK/x83-kb-1.kicad_pcb
X83-kb-1: common questions
What microcontroller does the X83-kb-1 use?
The X83-kb-1 is built around the STM32F072RBTx, from the STM32 family.
How big is the X83-kb-1 PCB?
The X83-kb-1 measures 315 × 130 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the X83-kb-1?
180 components, from 7 distinct parts. The full bill of materials is listed on this page.
Where can I download the X83-kb-1 design files?
From the scottcjx/x83-keyboard repository on GitHub, which has the KiCad layout; the links under Design files point to each one.
Can I use the X83-kb-1 design in my own project?
Yes, under the terms of its GPL-3.0 license, which scottcjx chose for the repository.
Can I test firmware for the X83-kb-1 without the hardware?
Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug STM32 firmware against it before you order a PCB.
More boards in x83-keyboard
Similar boards
STM32LumenPnP Motherboard
opulo-inc
149 × 95 mm296 parts4LCC-BY-SA-4.03.7k
STM32AxxSolder
AxxAxx
39 × 82.5 mm122 parts2LGPL-3.01.7k
STM32LibreVNA
jankae
122 × 98 mm592 parts6LGPL-3.01.6k
STM32AIOC
skuep
21 × 31.5 mm47 parts2LMIT1.4k
STM32Ferris
pierrechevalier83
208.8 × 86.8 mm102 parts2LSHL-2.11.3k
STM32176 pin board
rusefi
61.8 × 73.2 mm76 parts2LGPL-3.01.2k