13 open source boards using the STM32F072RBTx
Real designs built with the STM32F072RBTx, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.
STM32
E80-1800-pcb universal
ebastler
382 × 160 mm200 parts2LBSD-2-Clause86STM32
Pedals
janc18
86 × 62 mm116 parts4LGPL-3.010STM32
KbxBinaryClock.v4
kbx81
127 × 114.3 mm128 parts2LNo license2STM32
CommonSlotPSU TouchScreenController HW
cracked-machine
124 × 100 mm49 parts2LNo license2STM32
Kicad hiltop sensi board
devtank-ltd
159.6 × 100 mm354 parts4LNo license0STM32
LoTI Board
devtank-ltd
159.1 × 99.9 mm330 parts4LCERN-OHL-W-2.00STM32
FusIon Pack
Govish
162 × 154 mm319 parts4LMIT0STM32
PROYEK BMS NUVOTON
stpotomotif
170 × 100 mm276 parts4LNo license0STM32
BUT Pneumobil - ECU board
kajusK
143.8 × 80 mm261 parts2LNo license0STM32
X83-kb
scottcjx
315 × 130 mm180 parts2LGPL-3.00STM32
Kicad hiltop moto board
devtank-ltd
159.9 × 99.9 mm160 parts4LCERN-OHL-W-2.00STM32
KbxBinaryClock.v4.noroute
kbx81
127 × 114.3 mm128 parts2LNo license2STM32
X83-kb-1
scottcjx
315 × 130 mm180 parts2LGPL-3.00
How designs wire the STM32F072RBTx
Read from the KiCad layouts of 11 open source designs, one per repository: what each pin of the STM32F072RBTx connects to, and the resistors, capacitors and other passives placed on it.
- The VDD pins have a decoupling capacitor on 11 of 11 designs, most often 100 nF (then 4.7 µF).
- The VDDA pin has a decoupling capacitor on 10 of 11 designs, most often 100 nF (then 10 nF).
- The VDDIO2 pin has a decoupling capacitor on 10 of 11 designs, most often 100 nF (then 4.7 µF).
- The NRST pin has a capacitor to GND on 9 of 11 designs, most often 100 nF (then 10 nF).
| Pin | Connected to | Parts on the pin |
|---|---|---|
| VBATpin 1 | Connected to: 3.3V 55% · not connected 36% |
|
| PC13pin 2 | Connected to: Not connected 64% · a signal 36% | — |
| PC14pin 3 | Connected to: Signal 73% · not connected 27% |
|
| PC15pin 4 | Connected to: Signal 73% · not connected 27% |
|
| PF0pin 5 | Connected to: Signal 82% · not connected 18% |
|
| PF1pin 6 | Connected to: Signal 82% · not connected 18% |
|
| NRSTpin 7 | Connected to: A connector 64% |
|
| PC0pin 8 | Connected to: Signal 55% · not connected 45% |
|
| VSSApin 12 | Connected to: GND 100% | — |
| VDDApin 13 | Connected to: 3.3V 73% · a signal 27% |
|
| VSSpin 18, 31, 47, 63 | Connected to: GND 98% | — |
| VDDpin 19, 32, 64 | Connected to: 3.3V 91% |
|
| PA5pin 21 | Connected to: A connector 27% |
|
| PA7pin 23 | Connected to: A connector 27% · not connected 18% |
|
| PC4pin 24 | Connected to: Signal 73% · not connected 27% |
|
| PC5pin 25 | Connected to: Signal 73% · not connected 27% |
|
| PB0pin 26 | Connected to: Signal 91% |
|
| PB1pin 27 | Connected to: Signal 64% · not connected 36% |
|
| PB2pin 28 | Connected to: Signal 64% · not connected 36% |
|
| PB10pin 29 | Connected to: A connector 36% · not connected 27% |
|
| PB11pin 30 | Connected to: Signal 64% · not connected 36% |
|
| PB12pin 33 | Connected to: Signal 73% · not connected 27% |
|
| PB13pin 34 | Connected to: Signal 73% · not connected 27% |
|
| VDDIO2pin 48 | Connected to: 3.3V 91% |
|
| PC12pin 53 | Connected to: Signal 55% · not connected 45% |
|
| PB4pin 56 | Connected to: Signal 73% · not connected 27% |
|
| PB5pin 57 | Connected to: Signal 82% · not connected 18% |
|
| BOOT0pin 60 | Connected to: A connector 27% |
|
31 more pins vary from design to design. Connections count pins, parts count designs; values in brackets are how many parts had that value. Designs read include E80-1800-pcb universal by ebastler, Pedals by janc18, CommonSlotPSU TouchScreenController HW by cracked-machine and KbxBinaryClock.v4 by kbx81.
The STM32F072RBTx in open source designs
The gallery holds 13 open source boards using the STM32F072RBTx from 11 GitHub repositories; a typical one measures about 159.6 × 100 mm and carries around 180 components.
54% are two-layer designs, the rest use four layers or more, and 54% carry an open source license.
The most starred is E80-1800-pcb universal by ebastler.
Parts used alongside the STM32F072RBTx
Microcontrollers on boards using the STM32F072RBTx
What boards using the STM32F072RBTx are built for
STM32F072RBTx: common questions
Where can I find a STM32F072RBTx reference design?
Each of the 13 boards on this page is a real design using the STM32F072RBTx. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.
What decoupling capacitors do designs use on the STM32F072RBTx VDD pin?
The VDD pins have a decoupling capacitor on 11 of 11 designs, most often 100 nF (then 4.7 µF). Counted from the KiCad layouts of 11 open source designs using the STM32F072RBTx.
What decoupling capacitors do designs use on the STM32F072RBTx VDDA pin?
The VDDA pin has a decoupling capacitor on 10 of 11 designs, most often 100 nF (then 10 nF). Counted from the KiCad layouts of 11 open source designs using the STM32F072RBTx.
What decoupling capacitors do designs use on the STM32F072RBTx VDDIO2 pin?
The VDDIO2 pin has a decoupling capacitor on 10 of 11 designs, most often 100 nF (then 4.7 µF). Counted from the KiCad layouts of 11 open source designs using the STM32F072RBTx.
What parts are used alongside the STM32F072RBTx?
The AT25DN512CSSHF-B, CP2102N-A01-GQFN24, LD1117S33TR_SOT223, AD8646 and BTS4140N appear in the most repositories here.
Which microcontrollers do boards using the STM32F072RBTx use?
Most are built on STM32 (13).
How big is a typical board using the STM32F072RBTx?
The median is 159.6 × 100 mm, and 54% are two-layer designs.
What is the most popular open source board using the STM32F072RBTx?
By GitHub stars, E80-1800-pcb universal by ebastler, with 86 stars.
Can I simulate one of these boards using the STM32F072RBTx before building it?
Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.