DFR0781 BT401 board v1

sdylewski·Analog-Redial·Bluetooth/DFR0781_BT401/DFR0781_BT401_board_v1/DFR0781_BT401_board_v1.kicad_pcb

DFR0781 BT401 board v1 layout, top view — open source board by sdylewski

About the DFR0781 BT401 board v1

DFR0781 BT401 board v1 is an open source PCB design by sdylewski, published on GitHub under the MIT license. It is a 2-layer board measuring 35.9 × 23.5 mm, with 6 components from 6 distinct parts.

By type, the board carries 2 connectors, 1 IC, 1 diode, 1 capacitor and 1 resistor.

It belongs with the iot & wireless designs in this gallery.

From the project

A circuit board for old telephones to come back to life. Plug one or two phones in, and you can call the other phone, use bluetooth, connect to others via voip, and do a variety of other things with a plain old rotary or touch-tone phone. There's a nice web interface also!

What has been tried for the hands-free "rotary phone as a cell-phone handset" option. Newest information first.

Firmware lives in firmware/components/btcompanion/` (the BM64 and BT401 drivers). The public docs describe the BM64 and mention the BT401 as the cheaper option.

DFR0781 BT401 board v1 bill of materials (BOM)

6 components, 6 distinct parts — part numbers from the project's BOM.

QtyPartRefs
1
~
U1
1
PINHD_1X8_FEMALE
PINHD_1x8_Female
J1
1
PINHD_1X6_MALE
PINHD_1x6_Male
J2
1
LED_5MM
LED_5mm
D1
1
1uF 105_Ceramic
C1
1
1k
R1

DFR0781 BT401 board v1 design files

The KiCad project lives in the sdylewski/Analog-Redial repository on GitHub; these links point at the commit this page was built from.

DFR0781 BT401 board v1: common questions

How big is the DFR0781 BT401 board v1?

The DFR0781 BT401 board v1 measures 35.9 × 23.5 mm, has 2 copper layers and is 1.6 mm thick.

How many components are on the DFR0781 BT401 board v1?

6 components, from 6 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.

Where can I download the DFR0781 BT401 board v1 design files?

From the sdylewski/Analog-Redial repository on GitHub, which has the KiCad layout, the schematic and the BOM; the links under Design files point to each one.

Can I use the DFR0781 BT401 board v1 design in my own project?

Yes, under the terms of its MIT license, which sdylewski chose for the repository.

More boards in Analog-Redial

Similar boards