Redbearpad
sebasdv·redbearpad-pcb
About the Redbearpad PCB
Redbearpad is an open source PCB design by sebasdv, published on GitHub. It is a 2-layer board measuring 96 × 64 mm, with 14 components from 3 distinct parts.
By type, the board carries 12 switches and 2 connectors.
It belongs with the displays & leds and keyboards designs in this gallery.
From the project
RedBearPad: macropad/gamepad de 8 botones + OLED para RedBearLab Blend Micro (KiCad + firmware keypad y gamepad)
PCB de 96 × 64 mm. Mando estilo SNES orientado a juegos de plataforma que se enumera como control de Xbox 360 (XInput) y Steam reconoce de forma nativa. 12 entradas a GND con pull-up interno (activo en bajo): 10 switches Redragon SMD RGB MX Low Profile + 2 tact CAX C39832249 (Start/Select). La Blend Micro V1.0 va enchufada en la cara inferior (headers hembra 2×14, USB hacia el borde superior). Sin OLED (eliminada respecto de la v1).
Redbearpad bill of materials (BOM)
14 components, 3 distinct parts — part numbers from the project's BOM.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 2 | PinSocket_1x14_P2.54mm_Vertical | PinSocket_1x14_P2.54mm_Vertical | J1, J2 |
| 10 | SW_Redragon_LowProfile_PCB_1.00u | SW_Redragon_LowProfile_PCB_1.00u | SW1, SW2, SW3, SW4, SW5, SW6, SW7, SW8 +2 |
| 2 | SW_Tact_CAX | SW_Tact_CAX_4.5x4.5 | SW11, SW12 |
Redbearpad design files
The KiCad project lives in the sebasdv/redbearpad-pcb repository on GitHub; these links point at the commit this page was built from.
Redbearpad: common questions
How big is the Redbearpad PCB?
The Redbearpad measures 96 × 64 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the Redbearpad?
14 components, from 3 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.
Where can I download the Redbearpad design files?
From the sebasdv/redbearpad-pcb repository on GitHub, which has the KiCad layout, the schematic and the BOM; the links under Design files point to each one.
Can I use the Redbearpad design in my own project?
The repository has no license, so all rights stay with sebasdv. Use it as a reference, and ask the author before reusing the design.
Similar boards
View base
scottbez1
81.2 × 81.2 mm81 parts2LApache-2.022.2kBM28B0.6-24DSBreakout
scottbez1
15.2 × 35.6 mm3 parts2LApache-2.022.2kView screen
scottbez1
35 × 35 mm12 parts2LApache-2.022.2kLevelShifterBreakout
scottbez1
15.2 × 20.3 mm5 parts2LApache-2.022.2kAnyon e motherboard
byrantech
133 × 92 mm258 parts6LMIT4.3kSwitch
byrantech
18.5 × 11.1 mm5 parts2LMIT4.3k