Capacitive touch slider board prototype
second-string·capacitive-touch-slider-board-prototype·slider-board_rev_1_0/slider_rev_1_0.kicad_pcb
About the Capacitive touch slider board prototype
Capacitive touch slider board prototype is an open source PCB design by second-string, published on GitHub under the MIT license. It is a 2-layer board measuring 171.7 × 160.5 mm, with 150 components from 22 distinct parts.
Other key parts include the AT42QT2120-XUR, AT42QT2160-MMU and 74HCT595. By type, the board carries 95 resistors, 16 transistors, 16 diodes, 11 connectors, 7 capacitors and 5 ICs.
From the project
Protoype hardware and firmware for evaluating different designs of capacitive touch sliders
This repo contains a design for a prototype PCB for testing different capacitive touch slider designs. For more information on the different slider footprints, see writeup.
There is a schematic PDF and PCB layer prints PDF in the version 1.0 directory if you do not have KiCad. There are also Excel and interactive BOMs in the bom/ subdirectory.
Reach out if you would like the KiCad slider schematic symbol and footprint files, they are saved in my global library and so not directly accessible from the project directory.

Main components on the Capacitive touch slider board prototype
Capacitive touch slider board prototype bill of materials (BOM)
150 components, 22 distinct parts — part numbers from the project's BOM.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | AT42QT2120-XUR AT42QT2120 | TSSOP-20_4.4x6.5mm_P0.65mm | U1 |
| 2 | AT42QT2160-MMU | VQFN-28-1EP_4x4mm_P0.45mm_EP2.4x2.4mm_ThermalVias | U2, U3 |
| 2 | 74HCT595 | DHVQFN-16-1EP_2.5x3.5mm_P0.5mm_EP1x2mm | U4, U5 |
| 16 | Q_NMOS_GSD | TSOT-23 | Q1, Q2, Q3, Q4, Q5, Q6, Q7, Q8 +8 |
| 3 | Conn_01x03_Pin | PinHeader_1x03_P2.54mm_Vertical | J2, J4, J5 |
| 1 | Conn_01x02_Pin | PinHeader_1x02_P2.54mm_Vertical | J3 |
| 1 | Slider_Spatial_3P_1L | Slider_SpatialInterpolation_3P_1L | P1 |
| 3 | ~ | Cap_Touch_Ring_Small | P2, P5, P6 |
| 1 | Slider_Resistive_3P_1L | Slider_ResistiveInterpolation_3P_1L | P7 |
| 1 | ~ | Slider_ResistiveInterpolation_7P_2L | P8 |
| 1 | ~ | Slider_ResistiveInterpolation_Thin_7P_2L | P9 |
| 16 | LED | LED_SunLED_XZ_Reverse_Mount | D1, D2, D3, D4, D5, D6, D7, D8 +8 |
| 5 | 0.1uF | C_0603_1608Metric | C1, C2, C4, C6, C7 |
| 2 | 4.7nF | C_0603_1608Metric | C3, C5 |
| 3 | 47k | R_0603_1608Metric | R1, R17, R48 |
| 8 | 10k | R_0603_1608Metric | R4, R5, R6, R37, R38, R95, R96, R97 |
| 18 | 1k | R_0603_1608Metric | R7, R9, R14, R20, R25, R30, R33, R35 +10 |
| 8 | 2k4 | R_0603_1608Metric | R8, R10, R32, R34, R39, R40, R58, R59 |
| 32 | 1k2 | R_0603_1608Metric | R11, R12, R13, R15, R16, R18, R19, R21 +24 |
| 16 | 470R 1/2W | R_0603_1608Metric | R69, R70, R71, R72, R73, R74, R75, R76 +8 |
Show 2 more
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 6 | 2k | R_0603_1608Metric | R85, R86, R87, R92, R93, R94 |
| 4 | 1k5 | R_0603_1608Metric | R88, R89, R90, R91 |
Capacitive touch slider board prototype design files
The KiCad project lives in the second-string/capacitive-touch-slider-board-prototype repository on GitHub; these links point at the commit this page was built from.
Capacitive touch slider board prototype: common questions
How big is the Capacitive touch slider board prototype?
The Capacitive touch slider board prototype measures 171.7 × 160.5 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the Capacitive touch slider board prototype?
150 components, from 22 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.
Where can I download the Capacitive touch slider board prototype design files?
From the second-string/capacitive-touch-slider-board-prototype repository on GitHub, which has the KiCad layout, the schematic and the BOM; the links under Design files point to each one.
Can I use the Capacitive touch slider board prototype design in my own project?
Yes, under the terms of its MIT license, which second-string chose for the repository.