36 open source boards using the 74HCT595

Real designs built with the 74HCT595, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.

36 boardsClear filters|Most starred

How designs wire the 74HCT595

Read from the KiCad layouts of 21 open source designs, one per repository: what each pin of the 74HCT595 connects to, and the resistors, capacitors and other passives placed on it.

  • The VCC pin has a decoupling capacitor on 17 of 21 designs, most often 100 nF (then 4.7 µF).
  • The SRCLR pin is tied to VCC on 14 of 21 designs (a signal on 7).
QBpin 1Connected to: Signal 95%
  • Series resistor on 33% · 220 Ω (3), 330 Ω (2), 10 kΩ (1)
QEpin 4Connected to: Signal 100%
  • Series resistor on 33% · 220 Ω (3), 330 Ω (2), 10 kΩ (1)
QFpin 5Connected to: Signal 100%
  • Series resistor on 33% · 220 Ω (3), 330 Ω (2), 10 kΩ (1)
GNDpin 8Connected to: GND 100%
SRCLRpin 10Connected to: VCC 67% · a signal 33%
QApin 15Connected to: Signal 90%
  • Series resistor on 33% · 220 Ω (3), 330 Ω (2), 10 kΩ (1)
VCCpin 16Connected to: 5V 95%
  • Decoupling capacitor on 81% · 100 nF (20), 4.7 µF (2), 1 µF (1)

9 more pins vary from design to design. Connections count pins, parts count designs; values in brackets are how many parts had that value. Designs read include DuPal V3 by DuPAL-PAL-DUmper, NQSAP Loader / Debugger and Clock by TomNisbet, Fluepdot by Fluepke and Emurom by jtsiomb.

The 74HCT595 in open source designs

The gallery holds 36 open source boards using the 74HCT595 from 22 GitHub repositories; a typical one measures about 101 × 91.7 mm and carries around 90 components.

80% are two-layer designs, the rest use four layers or more, and 31% carry an open source license.

The most starred is DuPal V3 by DuPAL-PAL-DUmper.

Microcontrollers on boards using the 74HCT595

74HCT595: common questions

Where can I find a 74HCT595 reference design?

Each of the 36 boards on this page is a real design using the 74HCT595. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.

What decoupling capacitors do designs use on the 74HCT595 VCC pin?

The VCC pin has a decoupling capacitor on 17 of 21 designs, most often 100 nF (then 4.7 µF). Counted from the KiCad layouts of 21 open source designs using the 74HCT595.

How is the 74HCT595 SRCLR pin connected?

The SRCLR pin is tied to VCC on 14 of 21 designs (a signal on 7). Counted from the KiCad layouts of 21 open source designs using the 74HCT595.

What parts are used alongside the 74HCT595?

The 74HCT08, 74HCT32, AMS1117-3.3, 74HCT00 and 74HCT04 appear in the most repositories here.

Which microcontrollers do boards using the 74HCT595 use?

Most are built on RP2040/RP2350 (5), AVR/Arduino (3), ESP32 (3) and ESP8266 (3).

How big is a typical board using the 74HCT595?

The median is 101 × 91.7 mm, and 80% are two-layer designs.

What is the most popular open source board using the 74HCT595?

By GitHub stars, DuPal V3 by DuPAL-PAL-DUmper, with 57 stars.

Can I simulate one of these boards using the 74HCT595 before building it?

Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.

Browse boards by part