Sensor board
SEDS-PSU·avionics·electronics/sensor-board/sensor-board.kicad_pcb
About the Sensor board
Sensor board is an open source STM32 PCB design by SEDS-PSU, published on GitHub. It is a 4-layer board measuring 176.6 × 134.6 mm, with 185 components from 65 distinct parts.
Its main chip is the STM32F105VBH6, from the STM32 family. Other key parts include the LD3985M33R_SOT23, MAX33014EATB+, MCP96RL01T, MAX44252ASD and LMC6036. By type, the board carries 100 resistors, 29 capacitors, 26 connectors, 15 ICs, 5 test points and 4 diodes.
It belongs with the sensors designs in this gallery.
From the project
Board files and etc for avionics and teststand electronics
Main components on the Sensor board
Sensor board bill of materials (BOM)
185 components, 65 distinct parts — part numbers from the project's BOM.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | LD3985M33R_SOT23 | SOT-23-5 | U1 |
| 1 | STM32F105VBH6 | STM32F105VBH6 | U2 |
| 1 | MAX33014EATB+ | MAX33014EATB&plus_ | U3 |
| 7 | MCP96RL01T | MCP96RL01T_QFN | U4, U5, U6, U7, U8, U9, U10 |
| 2 | MAX44252ASD | MAX44252ASD&plus_ | U12, U16 |
| 3 | LMC6036 | SOP65P640X120-14N | U13, U14, U15 |
| 1 | 36 MHz | Crystal_SMD_3225-4Pin_3.2x2.5mm | Y1 |
| 1 | SWD Header | PinHeader_1x04_P2.54mm_Vertical | J3 |
| 1 | Suppply_5V | SL_2.54_H_2pin | J4 |
| 1 | Supply_24V | PowerPoleThroughHole | J5 |
| 1 | Supply_12V | PowerPoleThroughHole | J6 |
| 1 | Pressure_5 | SL_2.54_H_2pin | J7 |
| 1 | Pressure_6 | SL_2.54_H_2pin | J8 |
| 1 | Pressure_7 | SL_2.54_H_2pin | J9 |
| 1 | Pressure_8 | SL_2.54_H_2pin | J10 |
| 1 | Load_C_1 | SL_2.54_H_4pin | J11 |
| 1 | Load_C_2 | SL_2.54_H_4pin | J12 |
| 1 | Pressure_1 | SL_2.54_H_2pin | J13 |
| 1 | Pressure_2 | SL_2.54_H_2pin | J14 |
| 1 | Pressure_3 | SL_2.54_H_2pin | J15 |
Show 45 more
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | Pressure_4 | SL_2.54_H_2pin | J16 |
| 1 | Pressure_9 | SL_2.54_H_2pin | J17 |
| 1 | Flow_1 | SL_2.54_H_4pin | J18 |
| 1 | Flow_2 | SL_2.54_H_4pin | J19 |
| 2 | CAN_Bus | SL_2.54_H_2pin | J24, J25 |
| 1 | Therm_1 | K_type_thermo_conn_F | J26 |
| 1 | Therm_4 | K_type_thermo_conn_F | J27 |
| 1 | Therm_7 | K_type_thermo_conn_F | J28 |
| 1 | Therm_2 | K_type_thermo_conn_F | J29 |
| 1 | Therm_5 | K_type_thermo_conn_F | J30 |
| 1 | Therm_3 | K_type_thermo_conn_F | J31 |
| 1 | Therm_6 | K_type_thermo_conn_F | J32 |
| 3 | MM3Z3V6C | MM3Z3V6C | CR1, CR2, CR3 |
| 1 | SW_Push_Dual | Button CS1102 | SW1 |
| 5 | TestPoint | 3mm hole | TP10, TP11, TP12, TP13, TP14 |
| 3 | D | D_1206_3216Metric | D1, D2, D3 |
| 1 | LED_RGBA | RGB LED | D4 |
| 1 | 10uH | L_0603_1608Metric | L1 |
| 2 | 1uF | C_0603_1608Metric | C1, C5 |
| 1 | 10nF | C_0603_1608Metric | C2 |
| 10 | 100nF | C_0603_1608Metric | C3, C4, C8, C9, C10, C11, C12, C13 +2 |
| 2 | 20pF | C_0603_1608Metric | C6, C7 |
| 14 | 0.1uF | C_0603_1608Metric | C16, C17, C18, C19, C20, C21, C22, C23 +6 |
| 1 | 3.2k | R_0603_1608Metric | R1 |
| 39 | 100 | R_0603_1608Metric | R2, R9, R10, R22, R23, R24, R25, R31 +31 |
| 2 | 200 | R_0603_1608Metric | R3, R4 |
| 7 | 10k | R_0603_1608Metric | R5, R26, R43, R45, R46, R59, R60 |
| 1 | 0k | R_0603_1608Metric | R6 |
| 2 | 4.7k | R_0603_1608Metric | R7, R8 |
| 1 | 8.2k | R_0603_1608Metric | R11 |
| 1 | 1.8k | R_0603_1608Metric | R12 |
| 1 | 261 | R_0603_1608Metric | R13 |
| 2 | 140 | R_0603_1608Metric | R14, R15 |
| 7 | 2.49M | R_0603_1608Metric | R16, R17, R28, R33, R34, R49, R50 |
| 7 | 487k | R_0603_1608Metric | R18, R19, R29, R35, R36, R51, R52 |
| 7 | 2M | R_0603_1608Metric | R20, R21, R30, R37, R38, R53, R54 |
| 1 | 7.5k | R_0603_1608Metric | R27 |
| 1 | 43k | R_0603_1608Metric | R44 |
| 1 | 2.2k | R_0603_1608Metric | R47 |
| 1 | 13k | R_0603_1608Metric | R48 |
| 1 | 4.3k | R_0603_1608Metric | R61 |
| 1 | 22k | R_0603_1608Metric | R62 |
| 2 | 1.2k | R_0603_1608Metric | R79, R109 |
| 2 | 14.3 | R_0603_1608Metric | R80, R110 |
| 12 | 50k | R_0603_1608Metric | R81, R82, R83, R84, R85, R86, R111, R112 +4 |
Sensor board design files
The KiCad project lives in the SEDS-PSU/avionics repository on GitHub; these links point at the commit this page was built from.
Sensor board: common questions
What microcontroller does the Sensor board use?
The Sensor board is built around the STM32F105VBH6, from the STM32 family.
How big is the Sensor board?
The Sensor board measures 176.6 × 134.6 mm, has 4 copper layers and is 4.69 mm thick.
How many components are on the Sensor board?
185 components, from 65 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.
Where can I download the Sensor board design files?
From the SEDS-PSU/avionics repository on GitHub, which has the KiCad layout, the schematic and the BOM; the links under Design files point to each one.
Can I use the Sensor board design in my own project?
The repository has no license, so all rights stay with SEDS-PSU. Use it as a reference, and ask the author before reusing the design.
Can I test firmware for the Sensor board without the hardware?
Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug STM32 firmware against it before you order a PCB.
More boards in avionics
Similar boards
STM32
LumenPnP Motherboard
opulo-inc
149 × 95 mm296 parts4LCC-BY-SA-4.03.7kSTM32
Base
google
52.3 × 52.3 mm36 parts2LApache-2.02.9kSTM32
Main panel
google
234 × 84 mm26 parts4LApache-2.02.9kSTM32
Type a
google
150 × 30 mm14 parts2LApache-2.02.9kSTM32
Type g
google
169 × 30 mm24 parts2LApache-2.02.9kSTM32
Type c
google
188 × 30 mm17 parts2LApache-2.02.9k