18 open source boards using the LD3985M33R_SOT23

Real designs built with the LD3985M33R_SOT23, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.

18 boardsClear filters|Most starred

How designs wire the LD3985M33R_SOT23

Read from the KiCad layouts of 14 open source designs, one per repository: what each pin of the LD3985M33R_SOT23 connects to, and the resistors, capacitors and other passives placed on it.

  • The BYP pin has a capacitor to GND on 14 of 14 designs, most often 10 nF (then 100 nF).
  • The VIN pin has a decoupling capacitor on 12 of 14 designs, most often 1 µF (then 100 nF).
  • The VOUT pin has a decoupling capacitor on 11 of 14 designs, most often 1 µF (then 100 nF).
  • The INH pin is tied to 5V on 10 of 14 designs (a signal on 3).
VINpin 1Connected to: 5V 79% · a signal 21%
  • Decoupling capacitor on 86% · 1 µF (7), 100 nF (5), 10 µF (4)
GNDpin 2Connected to: GND 93%
INHpin 3Connected to: 5V 71% · a signal 21%
BYPpin 4Connected to: Signal 100%
  • Capacitor to GND on 100% · 10 nF (11), 100 nF (1), 1 µF (1)
VOUTpin 5Connected to: 3.3V 86%
  • Decoupling capacitor on 79% · 1 µF (5), 100 nF (4), 10 µF (2)

Connections count pins, parts count designs; values in brackets are how many parts had that value. Designs read include Pico probe programmer by martijnvwezel, Sound Direction Sensor by meerstern, Spor-Bicycle by BurakOnemli and CanSat2020 by GJN-Aerospace.

The LD3985M33R_SOT23 in open source designs

The gallery holds 18 open source boards using the LD3985M33R_SOT23 from 14 GitHub repositories; a typical one measures about 65 × 55.5 mm and carries around 57 components.

50% are two-layer designs, the rest use four layers or more, and 22% carry an open source license.

The most starred is Pico probe programmer by martijnvwezel.

Parts used alongside the LD3985M33R_SOT23

Microcontrollers on boards using the LD3985M33R_SOT23

LD3985M33R_SOT23: common questions

Where can I find a LD3985M33R_SOT23 reference design?

Each of the 18 boards on this page is a real design using the LD3985M33R_SOT23. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.

How is the LD3985M33R_SOT23 BYP pin connected?

The BYP pin has a capacitor to GND on 14 of 14 designs, most often 10 nF (then 100 nF). Counted from the KiCad layouts of 14 open source designs using the LD3985M33R_SOT23.

What decoupling capacitors do designs use on the LD3985M33R_SOT23 VIN pin?

The VIN pin has a decoupling capacitor on 12 of 14 designs, most often 1 µF (then 100 nF). Counted from the KiCad layouts of 14 open source designs using the LD3985M33R_SOT23.

What decoupling capacitors do designs use on the LD3985M33R_SOT23 VOUT pin?

The VOUT pin has a decoupling capacitor on 11 of 14 designs, most often 1 µF (then 100 nF). Counted from the KiCad layouts of 14 open source designs using the LD3985M33R_SOT23.

Which microcontrollers do boards using the LD3985M33R_SOT23 use?

Most are built on STM32 (14), PIC (1) and Raspberry Pi (1).

How big is a typical board using the LD3985M33R_SOT23?

The median is 65 × 55.5 mm, and 50% are two-layer designs.

What is the most popular open source board using the LD3985M33R_SOT23?

By GitHub stars, Pico probe programmer by martijnvwezel, with 27 stars.

Can I simulate one of these boards using the LD3985M33R_SOT23 before building it?

Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.

Browse boards by part