HardLabs

Usb a to pinhead

seesee010·Usb_a-to-pinhead

Usb a to pinhead PCB layout, top view — open source board by seesee010

About the Usb a to pinhead PCB

Usb a to pinhead is an open source PCB design by seesee010, published on GitHub. It is a 2-layer board measuring 18.2 × 17.7 mm, with 5 components from 5 distinct parts.

By type, the board carries 2 connectors, 1 diode, 1 capacitor and 1 resistor.

It belongs with the dev boards & breakouts designs in this gallery.

From the project

This is my third try of making a pcb. The intention was to create an USB-A female to Pinhead male adapter - Just for fun...

Usb a to pinhead bill of materials (BOM)

5 components, 5 distinct parts.

QtyPartRefs
1
USB_A
J1
1
Conn_01x02_Pin
J2
1
RED 2V
D1
1
100nF
C1
1
160R
R1

Usb a to pinhead design files

The KiCad project lives in the seesee010/Usb_a-to-pinhead repository on GitHub; these links point at the commit this page was built from.

Usb a to pinhead: common questions

How big is the Usb a to pinhead PCB?

The Usb a to pinhead measures 18.2 × 17.7 mm, has 2 copper layers and is 1.6 mm thick.

How many components are on the Usb a to pinhead?

5 components, from 5 distinct parts. The full bill of materials is listed on this page.

Where can I download the Usb a to pinhead design files?

From the seesee010/Usb_a-to-pinhead repository on GitHub, which has the KiCad layout and the schematic; the links under Design files point to each one.

Can I use the Usb a to pinhead design in my own project?

The repository has no license, so all rights stay with seesee010. Use it as a reference, and ask the author before reusing the design.

Similar boards