SmartSwither

sektor05·smartSwither·production/switcher.kicad_pcb

SmartSwither PCB layout, top view — open source STM32 board by sektor05

About the SmartSwither PCB

SmartSwither is an open source STM32 PCB design by sektor05, published on GitHub. It is a 2-layer board measuring 51.8 × 42.3 mm, with 55 components from 27 distinct parts.

Its main chip is the STM32F072C8Tx, from the STM32 family. Other key parts include the AMS1117-3.3, DS1822, LTV-817S, MOC3020M and TJA1051T-3. By type, the board carries 19 capacitors, 14 resistors, 7 ICs, 7 test points, 3 connectors and 2 transistors.

It belongs with the iot & wireless and sensors designs in this gallery.

From the project

This project is a DIY home automation solution for smart lighting, built around a custom PCB that fits into a standard electrical switch box. It uses a wired CAN bus for robust communication, controlled by a central single-board computer like Orange Pi. This approach provides ind

This project is a DIY home automation solution for smart lighting, built around a custom PCB that fits into a standard electrical switch box. It uses a wired CAN bus for robust communication, controlled by a central single-board computer like Orange Pi. This approach provides industrial-grade reliability for your smart home.

Dual Load Control: Each module has two on-board triacs, allowing it to control two independent lighting groups. Dimming Functionality: Supports dimmable LED lamps for smooth brightness adjustments, enabling "sunrise" or "soft evening light" scenes. Built-in Climate…

Main components on the SmartSwither

SmartSwither bill of materials (BOM)

55 components, 27 distinct parts.

QtyPartRefs
1
STM32F072C8Tx
U1
1
AMS1117-3.3
U2
1
DS1822
U3
1
LTV-817S
U4
2
MOC3020M
U5, U6
1
TJA1051T-3
U7
2
BT139-600
Q1, Q2
1
8mHz
Y1
1
Screw_Terminal_01x04
J1
1
Conn_01x04
J4
1
Screw_Terminal_01x03
J7
7
TestPoint
TP5, TP6, TP7, TP8, TP9, TP10, TP11
1
DC
D1
1
EABS26
D2
6
1uF
C1, C4, C5, C10, C11, C14
2
22pF
C2, C3
6
100nF
C6, C7, C8, C12, C13, C15
1
10nF
C9
2
30pF
C16, C17
2
0.01uF 400V
C18, C19
Show 7 more
QtyPartRefs
3
4.7k
R3, R5, R8
2
10k
R6, R7
2
30k 0,5W
R12, R13
2
1k
R14, R18
2
100
R15, R17
1
1k
R16
2
39 2W
R20, R21

SmartSwither design files

The KiCad project lives in the sektor05/smartSwither repository on GitHub; these links point at the commit this page was built from.

SmartSwither: common questions

What microcontroller does the SmartSwither use?

The SmartSwither is built around the STM32F072C8Tx, from the STM32 family.

How big is the SmartSwither PCB?

The SmartSwither measures 51.8 × 42.3 mm, has 2 copper layers and is 1.6 mm thick.

How many components are on the SmartSwither?

55 components, from 27 distinct parts. The full bill of materials is listed on this page.

Where can I download the SmartSwither design files?

From the sektor05/smartSwither repository on GitHub, which has the KiCad layout and the schematic; the links under Design files point to each one.

Can I use the SmartSwither design in my own project?

The repository has no license, so all rights stay with sektor05. Use it as a reference, and ask the author before reusing the design.

Can I test firmware for the SmartSwither without the hardware?

Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug STM32 firmware against it before you order a PCB.

Similar boards