17 open source boards using the TJA1051T-3
Real designs built with the TJA1051T-3, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.
STM32RT-STACK
fupsrl
150 × 150 mm472 parts6LCC-BY-NC-4.014
STM32DCServo
Alex-C-EE
40 × 40 mm57 parts4LNo license13
NXPPrecharge
LSUTigerRacing
133 × 98 mm113 parts2LNo license7
Polygonus-Universal-112
FOME-Tech
160 × 121 mm120 parts4LNo license4
ESP32TSAL G V4 2
HKUST-Red-Bird-Racing-EVRT
140 × 60 mm117 parts2LNo license3
STM32Stm32-can
acalinp
33.5 × 63.1 mm30 parts2LGPL-3.00
NXPFault Latch 2
85.8 × 94.2 mm103 parts2LNo license7
ESP32VCU V3
114 × 95 mm90 parts2LNo license3
NXPTEST
64 × 45.1 mm56 parts2LNo license7
ESP32VCU V2 kicad9
100 × 100 mm79 parts2LNo license3
NXPRML-Yianni-Revamp
72.6 × 32.5 mm40 parts2LNo license7
ESP32SSRU v3.3
95 × 78 mm66 parts2LNo license3
NXPRML HVI
81 × 34 mm39 parts2LNo license7
ESP32BSPD
57 × 50 mm60 parts2LNo license3
ESP32Front dash unit
101 × 63 mm56 parts2LNo license3
ESP32Sensor Board
86.6 × 82.2 mm29 parts2LNo license3- schematic only · 8 parts
BreathOf fresh Air
8 parts2LNo license7
The TJA1051T-3 in open source designs
The gallery holds 17 open source boards using the TJA1051T-3 from 6 GitHub repositories; a typical one measures about 90.8 × 70.6 mm and carries around 60 components.
82% are two-layer designs, the rest use four layers or more, and 6% carry an open source license.
The most starred is RT-STACK by fupsrl.
What boards using the TJA1051T-3 are built for
TJA1051T-3: common questions
Where can I find a TJA1051T-3 reference design?
Each of the 17 boards on this page is a real design using the TJA1051T-3. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.
Which microcontrollers do boards using the TJA1051T-3 use?
Most are built on ESP32 (7), NXP (5) and STM32 (3).
How big is a typical board using the TJA1051T-3?
The median is 90.8 × 70.6 mm, and 82% are two-layer designs.
What is the most popular open source board using the TJA1051T-3?
By GitHub stars, RT-STACK by fupsrl, with 14 stars.
Can I simulate one of these boards using the TJA1051T-3 before building it?
Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.