A13 test project VGA board
About the A13 test project VGA board
A13 test project VGA board is an open source PCB design by servomouse, published on GitHub. It is a 4-layer board measuring 50 × 50 mm, with 42 components from 14 distinct parts.
Other key parts include the 74AHCT244. By type, the board carries 30 resistors, 5 diodes, 3 ICs, 3 transistors and 1 connector.
From the project
Test SBC with Allwinner A13
Main components on the A13 test project VGA board
A13 test project VGA board bill of materials (BOM)
42 components, 14 distinct parts.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 3 | 74AHCT244 | SO-20_5.3x12.6mm_P1.27mm | U4, U5, U6 |
| 3 | 2N7002 | SOT-23 | Q1, Q2, Q3 |
| 1 | VGA_CONN | PinSocket_2x20_P1.27mm_Vertical | J7 |
| 5 | BAT54S | SOT-23 | D4, D5, D6, D7, D8 |
| 3 | 510R | R_0201_0603Metric | R22, R23, R36 |
| 3 | 10k | R_0201_0603Metric | R24, R35, R45 |
| 3 | 47k | R_0201_0603Metric | R25, R26, R37 |
| 3 | 1k | R_0201_0603Metric | R27, R28, R38 |
| 3 | 17.8k | R_0201_0603Metric | R29, R39, R46 |
| 3 | 8.66k | R_0201_0603Metric | R30, R40, R47 |
| 3 | 4.32k | R_0201_0603Metric | R31, R41, R48 |
| 3 | 2.2k | R_0201_0603Metric | R32, R42, R49 |
| 3 | 1.05k | R_0201_0603Metric | R33, R43, R50 |
| 3 | 549R | R_0201_0603Metric | R34, R44, R51 |
A13 test project VGA board design files
The KiCad project lives in the servomouse/A13_test_project repository on GitHub; these links point at the commit this page was built from.
A13 test project VGA board: common questions
How big is the A13 test project VGA board?
The A13 test project VGA board measures 50 × 50 mm, has 4 copper layers and is 1.6 mm thick.
How many components are on the A13 test project VGA board?
42 components, from 14 distinct parts. The full bill of materials is listed on this page.
Where can I download the A13 test project VGA board design files?
From the servomouse/A13_test_project repository on GitHub, which has the KiCad layout; the links under Design files point to each one.
Can I use the A13 test project VGA board design in my own project?
The repository has no license, so all rights stay with servomouse. Use it as a reference, and ask the author before reusing the design.
