7 open source boards using the 74AHCT244

Real designs built with the 74AHCT244, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.

7 boardsClear filters|Most starred

How designs wire the 74AHCT244

Read from the KiCad layouts of 7 open source designs, one per repository: what each pin of the 74AHCT244 connects to, and the resistors, capacitors and other passives placed on it.

  • The VCC pin has a decoupling capacitor on 5 of 7 designs, most often 100 nF (then 10 nF).
  • The 2Y0 pin has a series resistor on 4 of 7 designs, most often 47 Ω (then 0 Ω).
  • The 1Y2 pin has a series resistor on 4 of 7 designs, most often 47 Ω (then 0 Ω).
  • The 2Y1 pin has a series resistor on 3 of 7 designs, most often 0 Ω (then 2.2 kΩ).
2Y0pin 3Connected to: A connector 57%
  • Series resistor on 57% · 47 Ω (1), 0 Ω (1), 4.32 kΩ (1)
2Y1pin 5Connected to: A connector 29% · not connected 29%
  • Series resistor on 43% · 0 Ω (1), 2.2 kΩ (1)
2Y2pin 7Connected to: A connector 29% · not connected 29%
  • Series resistor on 43% · 0 Ω (1), 1.05 kΩ (1)
2Y3pin 9Connected to: A connector 29% · not connected 29%
  • Series resistor on 43% · 0 Ω (1), 549 Ω (1)
GNDpin 10Connected to: GND 100%
1Y3pin 12Connected to: A connector 57%
  • Series resistor on 43% · 0 Ω (1), 8.66 kΩ (1)
1Y2pin 14Connected to: A connector 29%
  • Series resistor on 57% · 47 Ω (1), 0 Ω (1), 17.8 kΩ (1)
VCCpin 20Connected to: 5V 100%
  • Decoupling capacitor on 71% · 100 nF (3), 10 nF (3), 1 µF (1)

12 more pins vary from design to design. Connections count pins, parts count designs; values in brackets are how many parts had that value. Designs read include Amiga 2000 EATX by jasonsbeer, GCM by JonathSpirit, PikaPC Mainboard by techav-homebrew and Lcd display by kwiecinski.

The 74AHCT244 in open source designs

The gallery holds 7 open source boards using the 74AHCT244 from 7 GitHub repositories; a typical one measures about 133 × 99.5 mm and carries around 105 components.

71% use four copper layers or more, and 71% carry an open source license.

The most starred is Amiga 2000 EATX by jasonsbeer.

Parts used alongside the 74AHCT244

Microcontrollers on boards using the 74AHCT244

74AHCT244: common questions

Where can I find a 74AHCT244 reference design?

Each of the 7 boards on this page is a real design using the 74AHCT244. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.

What decoupling capacitors do designs use on the 74AHCT244 VCC pin?

The VCC pin has a decoupling capacitor on 5 of 7 designs, most often 100 nF (then 10 nF). Counted from the KiCad layouts of 7 open source designs using the 74AHCT244.

What resistor goes on the 74AHCT244 2Y0 pin?

The 2Y0 pin has a series resistor on 4 of 7 designs, most often 47 Ω (then 0 Ω). Counted from the KiCad layouts of 7 open source designs using the 74AHCT244.

What resistor goes on the 74AHCT244 1Y2 pin?

The 1Y2 pin has a series resistor on 4 of 7 designs, most often 47 Ω (then 0 Ω). Counted from the KiCad layouts of 7 open source designs using the 74AHCT244.

What parts are used alongside the 74AHCT244?

The 74AHC138, 74AHC1G04, 74AHC273 and CD74AC238 appear in the most repositories here.

Which microcontrollers do boards using the 74AHCT244 use?

Most are built on ESP32 (1).

How big is a typical board using the 74AHCT244?

The median is 133 × 99.5 mm, and 29% are two-layer designs.

What is the most popular open source board using the 74AHCT244?

By GitHub stars, Amiga 2000 EATX by jasonsbeer, with 199 stars.

Can I simulate one of these boards using the 74AHCT244 before building it?

Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.

Browse boards by part