555 Timer Clock
Seth-Andrei·KiCad_555_Timer_Clock_demo
About the 555 Timer Clock PCB
555 Timer Clock is an open source PCB design by Seth-Andrei, published on GitHub under the MIT license. It is a 2-layer board measuring 39 × 25 mm, with 12 components from 10 distinct parts.
Other key parts include the ICM7555XB. By type, the board carries 4 resistors, 2 connectors, 2 switches, 2 capacitors, 1 IC and 1 diode.
From the project
The primary goal of this project is to teach and practice basic 2‑layer PCB concepts, not to create an optimized or production‑ready design. It is intended for students, hobbyists, and beginners learning PCB layout.
The primary goal of this project is to teach and practice basic 2‑layer PCB concepts, not to create an optimized or production‑ready design. It is intended for students, hobbyists, and beginners learning PCB layout.
The timing frequency is set by two resistors and one capacitor:
Main components on the 555 Timer Clock
555 Timer Clock bill of materials (BOM)
12 components, 10 distinct parts — part numbers from the project's BOM.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | ICM7555XB ICM7555xB | SOIC-8_3.9x4.9mm_P1.27mm | U1 |
| 1 | +5V | Terminal_Block_5mm | J1 |
| 1 | CLK_Out | PinHeader_1x02_P2.54mm_Vertical | J2 |
| 1 | Trigger | slide_switch_2.54mm | SW1 |
| 1 | RST | tact_switch_5mm | SW2 |
| 1 | LED | LED_D5.0mm | D1 |
| 1 | 0.01UF 0.01uF | C_Disc_D3.8mm_W2.6mm_P2.50mm | C1 |
| 1 | 470UF 470uF | CP_Elec_5x5.4 | C2 |
| 3 | 10K | R_1206_3216Metric_Pad1.30x1.75mm_HandSolder | R1, R3, R4 |
| 1 | 470 | R_1206_3216Metric_Pad1.30x1.75mm_HandSolder | R2 |
555 Timer Clock design files
The KiCad project lives in the Seth-Andrei/KiCad_555_Timer_Clock_demo repository on GitHub; these links point at the commit this page was built from.
555 Timer Clock: common questions
How big is the 555 Timer Clock PCB?
The 555 Timer Clock measures 39 × 25 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the 555 Timer Clock?
12 components, from 10 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.
Where can I download the 555 Timer Clock design files?
From the Seth-Andrei/KiCad_555_Timer_Clock_demo repository on GitHub, which has the KiCad layout, the schematic and the BOM; the links under Design files point to each one.
Can I use the 555 Timer Clock design in my own project?
Yes, under the terms of its MIT license, which Seth-Andrei chose for the repository.