16 open source boards using the ICM7555xB

Real designs built with the ICM7555xB, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.

16 boardsClear filters|Most starred

How designs wire the ICM7555xB

Read from the KiCad layouts of 14 open source designs, one per repository: what each pin of the ICM7555xB connects to, and the resistors, capacitors and other passives placed on it.

  • The THRES pin has a capacitor to GND on 12 of 14 designs, most often 470 µF (then 100 nF).
  • The CONT pin has a capacitor to GND on 9 of 14 designs, most often 10 nF (then 100 nF).
  • The TRIG pin has a capacitor to GND on 8 of 14 designs, most often 100 nF (then 1 nF).
  • The DISCH pin has a pull-up to 5V on 8 of 14 designs, most often 10 kΩ (then 270 kΩ).
GNDpin 1Connected to: GND 100%
TRIGpin 2Connected to: Signal 100%
  • Capacitor to GND on 57% · 100 nF (2), 1 nF (1), 1 µF (1)
  • Pull-up to 5V on 43% · 10 kΩ (4), 212 kΩ (1), 270 kΩ (1)
  • Series resistor on 43% · 10 kΩ (1), 270 kΩ (1)
OUTpin 3Connected to: A connector 36%
  • Series resistor on 43% · 100 Ω (2)
CONTpin 5Connected to: Signal 71% · not connected 21%
  • Capacitor to GND on 64% · 10 nF (7), 100 nF (1)
THRESpin 6Connected to: Signal 100%
  • Capacitor to GND on 86% · 470 µF (4), 100 nF (2), 1 nF (1)
  • Pull-up to 5V on 43% · 10 kΩ (4), 212 kΩ (1), 270 kΩ (1)
  • Series resistor on 43% · 10 kΩ (1), 270 kΩ (1)
DISCHpin 7Connected to: Signal 93%
  • Pull-up to 5V on 57% · 10 kΩ (6), 270 kΩ (1)
  • Series resistor on 57% · 10 kΩ (1), 1 kΩ (1), 100 kΩ (1)
  • Capacitor to GND on 36% · 470 µF (4), 1 µF (1)
VCCpin 8Connected to: 5V 71% · a signal 29%

1 more pin varies from design to design. Connections count pins, parts count designs; values in brackets are how many parts had that value. Designs read include ByteFrost by gilkeidar, 555 Timer Clock by Adrian-dre, 555 by AmiraMerzougui and 555 Timer Clock by BlabbotLance-011.

The ICM7555xB in open source designs

The gallery holds 16 open source boards using the ICM7555xB from 15 GitHub repositories; a typical one measures about 39.8 × 48 mm and carries around 18 components.

100% are two-layer designs, the rest use four layers or more, and 31% carry an open source license.

The most starred is ByteFrost by gilkeidar.

What boards using the ICM7555xB are built for

ICM7555xB: common questions

Where can I find a ICM7555xB reference design?

Each of the 16 boards on this page is a real design using the ICM7555xB. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.

How is the ICM7555xB THRES pin connected?

The THRES pin has a capacitor to GND on 12 of 14 designs, most often 470 µF (then 100 nF). Counted from the KiCad layouts of 14 open source designs using the ICM7555xB.

How is the ICM7555xB CONT pin connected?

The CONT pin has a capacitor to GND on 9 of 14 designs, most often 10 nF (then 100 nF). Counted from the KiCad layouts of 14 open source designs using the ICM7555xB.

How is the ICM7555xB TRIG pin connected?

The TRIG pin has a capacitor to GND on 8 of 14 designs, most often 100 nF (then 1 nF). Counted from the KiCad layouts of 14 open source designs using the ICM7555xB.

How big is a typical board using the ICM7555xB?

The median is 39.8 × 48 mm, and 100% are two-layer designs.

What is the most popular open source board using the ICM7555xB?

By GitHub stars, ByteFrost by gilkeidar, with 5 stars.

Can I simulate one of these boards using the ICM7555xB before building it?

Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.

Browse boards by part