EWU-ASME-SDC-2027-Transmitter
SethHibpshman·EWU-ASME-SDC-2027-Transmitter·hardware/kicad_project_files/transmitter.kicad_pcb
About the EWU-ASME-SDC-2027-Transmitter PCB
EWU-ASME-SDC-2027-Transmitter is an open source PCB design by SethHibpshman, published on GitHub under the GPL-3.0 license. It is a 2-layer board measuring 150 × 110 mm, with 40 components from 20 distinct parts.
Other key parts include the IP5306-I2C and IP3005A. By type, the board carries 19 capacitors, 14 resistors, 3 diodes, 2 ICs and 1 inductor.
It belongs with the robotics & motion, displays & leds and power & battery designs in this gallery.
From the project
Custom ESP32-S3 handheld Operator Console for the EWU ASME 2027 Student Design Competition (PODIUM) robot. Work in progress.
- Overview - Status - Functionality - System Design - Author - AI Disclosure - License
The 2027 ASME Student Design Competition, PODIUM, has one robot compete in five Disciplines. Each Run starts with a 30-second autonomous phase and ends with a 2-minute crewed phase, where the team drives the robot through its own Operator Console. ASME doesn't provide a control system, and the rules allow exactly one control link on a license-free band.

Main components on the EWU-ASME-SDC-2027-Transmitter
EWU-ASME-SDC-2027-Transmitter bill of materials (BOM)
40 components, 20 distinct parts — part numbers from the project's BOM.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | IP5306-I2C INJOINIC(英集芯) | ESOP-8_L4.9-W3.9-P1.27-LS6.0-BL-EP2.0 | U2 |
| 1 | IP3005A INJOINIC(英集芯) | ESOP-8_L4.9-W3.9-P1.27-LS6.0-BL-EP | U3 |
| 1 | TYPE-C16PIN SHOU HAN(首韩) | USB-C-SMD_TYPE-C16PIN | USB1 |
| 1 | LED | LED_D5.0mm | D1 |
| 1 | USBLC6-2SC6 ST(意法半导体) | SOT-23-6_L2.9-W1.6-P0.95-LS2.8-BL | D3 |
| 1 | SS34 MDD(Microdiode Electronics) | D_SMA | D4 |
| 1 | XRNR5040-1.0uH/N XRNR5040-1.0UH/N XR(祥如) | IND-SMD_L5.0-W5.0 | L2 |
| 9 | 100NF 100nF YAGEO | C_0603 | C1, C16, C19, C20, C21, C22, C23, C24 +1 |
| 3 | 10UF 10uF Samsung Electro-Mechanics | C_0603 | C2, C3, C15 |
| 5 | 22UF 22uF Samsung Electro-Mechanics | C_0805 | C10, C11, C12, C13, C14 |
| 1 | 4.7UF 4.7uF Samsung Electro-Mechanics | C_0603 | C17 |
| 1 | 2.2UF 2.2uF Samsung Electro-Mechanics | C_0603 | C18 |
| 2 | 220Ω | R_0603_1608Metric | R3, R16 |
| 1 | 0.5Ω | R_0603_1608Metric | R4 |
| 1 | 10kΩ | R_0603_1608Metric | R6 |
| 1 | 2Ω | R_0603_1608Metric | R7 |
| 2 | 3kΩ | R_0603_1608Metric | R8, R9 |
| 1 | 100Ω | R_0603_1608Metric | R10 |
| 4 | 100kΩ | R_0603_1608Metric | R13, R14, R15, R17 |
| 2 | 5.1kΩ | R_0603_1608Metric | R18, R19 |
EWU-ASME-SDC-2027-Transmitter design files
The KiCad project lives in the SethHibpshman/EWU-ASME-SDC-2027-Transmitter repository on GitHub; these links point at the commit this page was built from.
EWU-ASME-SDC-2027-Transmitter: common questions
How big is the EWU-ASME-SDC-2027-Transmitter PCB?
The EWU-ASME-SDC-2027-Transmitter measures 150 × 110 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the EWU-ASME-SDC-2027-Transmitter?
40 components, from 20 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.
Where can I download the EWU-ASME-SDC-2027-Transmitter design files?
From the SethHibpshman/EWU-ASME-SDC-2027-Transmitter repository on GitHub, which has the KiCad layout, the schematic and the BOM; the links under Design files point to each one.
Can I use the EWU-ASME-SDC-2027-Transmitter design in my own project?
Yes, under the terms of its GPL-3.0 license, which SethHibpshman chose for the repository.
Similar boards
BM28B0.6-24DSBreakout
scottbez1
15.2 × 35.6 mm3 parts2LApache-2.022.2kLevelShifterBreakout
scottbez1
15.2 × 20.3 mm5 parts2LApache-2.022.2kView base
scottbez1
81.2 × 81.2 mm81 parts2LApache-2.022.2kView screen
scottbez1
35 × 35 mm12 parts2LApache-2.022.2kDisplay eval
byrantech
52.1 × 22.6 mm12 parts4LMIT4.3kChainlinkBase
scottbez1
98.4 × 190.5 mm119 parts2LApache-2.04.2k