Google-T-Rex-Game
ShaoChiehLien·Google-T-Rex-Game·Printed circuit board (PCB)/advPCB/miniPCB.kicad_pcb
About the Google-T-Rex-Game PCB
Google-T-Rex-Game is an open source STM32 PCB design by ShaoChiehLien, published on GitHub. It is a 2-layer board measuring 99.1 × 99.1 mm, with 28 components from 14 distinct parts.
Its main chip is the STM32F051R8Tx, from the STM32 family. By type, the board carries 9 connectors, 8 capacitors, 5 resistors, 3 switches, 1 IC and 1 diode.
It belongs with the displays & leds designs in this gallery.
From the project
Google T-Rex Game using Embedded C with Customized Printed Circuit Board
For the main game part, we used our own algorithm to randomly produce three different characters: single cactus, cactus cluster and crow with random distances, which is a significant specialty of this project. By using non-visible simple squares to record the characters' position, we could track if the T-Rec touch the cactus or crow and determine if it is Game Over. At last, we added the bit map of each character on the non-visible simple square to finish the User Interface.
Main components on the Google-T-Rex-Game
Google-T-Rex-Game bill of materials (BOM)
28 components, 14 distinct parts.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | STM32F051R8Tx | LQFP-64_10x10mm_P0.5mm | U1 |
| 1 | USB_B_Micro | USB_Micro-B_Molex_47346-0001 | J1 |
| 3 | Conn_01x01_Female | PinSocket_1x01_P2.54mm_Vertical | J2, J3, J6 |
| 1 | Conn_01x03_Female | PinSocket_1x03_P2.54mm_Vertical | J4 |
| 3 | Conn_01x04_Female | PinSocket_1x04_P2.54mm_Vertical | J5, J8, J9 |
| 1 | Conn_01x20_Female | PinSocket_1x20_P2.54mm_Vertical | J7 |
| 1 | R_POT_US | Potentiometer_Alps_RK09K_Single_Vertical | RV1 |
| 3 | SW_Push | SW_Tactile_Straight_KSA0Axx1LFTR | SW1, SW2, SW3 |
| 1 | D | D_5W_P10.16mm_Horizontal | D1 |
| 1 | 100nF | C_Axial_L3.8mm_D2.6mm_P7.50mm_Horizontal | C1 |
| 3 | C | C_Radial_D6.3mm_H5.0mm_P2.50mm | C2, C3, C4 |
| 4 | C | C_Axial_L3.8mm_D2.6mm_P7.50mm_Horizontal | C5, C6, C7, C8 |
| 1 | 40000 | R_Axial_DIN0207_L6.3mm_D2.5mm_P7.62mm_Horizontal | R1 |
| 4 | R | R_Axial_DIN0207_L6.3mm_D2.5mm_P7.62mm_Horizontal | R2, R3, R4, R5 |
Google-T-Rex-Game design files
The KiCad project lives in the ShaoChiehLien/Google-T-Rex-Game repository on GitHub; these links point at the commit this page was built from.
Google-T-Rex-Game: common questions
What microcontroller does the Google-T-Rex-Game use?
The Google-T-Rex-Game is built around the STM32F051R8Tx, from the STM32 family.
How big is the Google-T-Rex-Game PCB?
The Google-T-Rex-Game measures 99.1 × 99.1 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the Google-T-Rex-Game?
28 components, from 14 distinct parts. The full bill of materials is listed on this page.
Where can I download the Google-T-Rex-Game design files?
From the ShaoChiehLien/Google-T-Rex-Game repository on GitHub, which has the KiCad layout; the links under Design files point to each one.
Can I use the Google-T-Rex-Game design in my own project?
The repository has no license, so all rights stay with ShaoChiehLien. Use it as a reference, and ask the author before reusing the design.
Can I test firmware for the Google-T-Rex-Game without the hardware?
Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug STM32 firmware against it before you order a PCB.
Similar boards
STM32
LumenPnP Motherboard
opulo-inc
149 × 95 mm296 parts4LCC-BY-SA-4.03.7kSTM32
Type g
google
169 × 30 mm24 parts2LApache-2.02.9kSTM32
Main panel
google
234 × 84 mm26 parts4LApache-2.02.9kSTM32
Base
google
52.3 × 52.3 mm36 parts2LApache-2.02.9kSTM32
Type a
google
150 × 30 mm14 parts2LApache-2.02.9kSTM32
Type c
google
188 × 30 mm17 parts2LApache-2.02.9k