STM32
sheelscripts·STM32
About the STM32 PCB
STM32 is an open source STM32 PCB design by sheelscripts, published on GitHub. It is a 2-layer board measuring 41 × 31 mm, with 28 components from 17 distinct parts.
Its main chip is the STM32F103C8T6, from the STM32 family. Other key parts include the AMS1117-3.3. By type, the board carries 13 capacitors, 5 resistors, 4 connectors, 2 ICs, 1 crystal and 1 switch.
It belongs with the power & battery designs in this gallery.
From the project
Compact STM32F103C8T6 controller board designed in KiCad, with USB power and native USB data lines broken out on PA11/PA12.
Compact STM32F103C8T6 controller board designed in KiCad, with USB power and native USB data lines broken out on PA11/PA12. The design includes on-board 3.3 V regulation, external 16 MHz crystal, filtered analog supply (VDDA), BOOT0 selection, and headers for SWD, UART1, and I2C2. Use it as a reference design or a starting point for custom STM32 hardware.
- Complete KiCad project: schematic, PCB, and project files - Manufacturing-ready outputs (Gerbers, drill files, and pick-and-place) - 3D model included for enclosure fit checks
Main components on the STM32
STM32 bill of materials (BOM)
28 components, 17 distinct parts.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | AMS1117-3.3 | SOT-223-3_TabPin2 | U1 |
| 1 | STM32F103C8T6 | LQFP-48_7x7mm_P0.5mm | U2 |
| 1 | 16Mhz | Crystal_SMD_3225-4Pin_3.2x2.5mm | Y1 |
| 1 | USB_B_Micro | USB_Micro-B_Wuerth_629105150521 | J1 |
| 3 | Conn_01x04_Pin | PinHeader_1x04_P2.54mm_Vertical | J2, J3, J4 |
| 1 | SW_SPDT | SW_SPDT_PCM12 | SW1 |
| 1 | RED | LED_0603_1608Metric | D1 |
| 1 | 120R | L_0603_1608Metric | FB1 |
| 1 | 22u | C_0402_1005Metric | C1 |
| 1 | 22u | C_0805_2012Metric | C2 |
| 1 | 10u | C_0603_1608Metric | C3 |
| 5 | 100n | C_0402_1005Metric | C4, C5, C6, C7, C11 |
| 1 | 10n | C_0402_1005Metric | C8 |
| 2 | 1u | C_0402_1005Metric | C9, C10 |
| 2 | 10p | C_0402_1005Metric | C12, C13 |
| 4 | 1k5 | R_0402_1005Metric | R1, R3, R4, R5 |
| 1 | 10k | R_0402_1005Metric | R2 |
STM32 design files
The KiCad project lives in the sheelscripts/STM32 repository on GitHub; these links point at the commit this page was built from.
- LayoutSTM32.kicad_pcb
- SchematicSTM32.kicad_sch
STM32: common questions
What microcontroller does the STM32 use?
The STM32 is built around the STM32F103C8T6, from the STM32 family.
How big is the STM32 PCB?
The STM32 measures 41 × 31 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the STM32?
28 components, from 17 distinct parts. The full bill of materials is listed on this page.
Where can I download the STM32 design files?
From the sheelscripts/STM32 repository on GitHub, which has the KiCad layout and the schematic; the links under Design files point to each one.
Can I use the STM32 design in my own project?
The repository has no license, so all rights stay with sheelscripts. Use it as a reference, and ask the author before reusing the design.
Can I test firmware for the STM32 without the hardware?
Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug STM32 firmware against it before you order a PCB.
Similar boards
STM32
LumenPnP Motherboard
opulo-inc
149 × 95 mm296 parts4LCC-BY-SA-4.03.7kSTM32
Type g
google
169 × 30 mm24 parts2LApache-2.02.9kSTM32
Base
google
52.3 × 52.3 mm36 parts2LApache-2.02.9kSTM32
Main panel
google
234 × 84 mm26 parts4LApache-2.02.9kSTM32
Type a
google
150 × 30 mm14 parts2LApache-2.02.9kSTM32
Type c
google
188 × 30 mm17 parts2LApache-2.02.9k