Minor project
ShmokeD·minor-project
About the Minor project PCB
Minor project is an open source AVR/Arduino PCB design by ShmokeD, published on GitHub. It is a 4-layer board measuring 48 × 37.5 mm, with 50 components from 26 distinct parts.
Its main chip is the 328P-MUR, from the AVR/Arduino family. Other key parts include the LM1117IMPX-5.0, HMC596LP4E, HMC595A, DPX165850DT-8085D3 and HMC8410LP2FE. By type, the board carries 22 capacitors, 8 ICs, 4 resistors, 2 connectors, 1 crystal and 1 switch.
Main components on the Minor project
Minor project bill of materials (BOM)
50 components, 26 distinct parts.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | LM1117IMPX-5.0 | SOT-223 | IC2 |
| 1 | 328P-MUR | VQFN-32-1EP_5x5mm_P0.5mm_EP3.254x3.254mm | IC3 |
| 2 | HMC596LP4E | QFN_24_ADI | U1, U2 |
| 1 | HMC595A | HMC595A_ADI | U3 |
| 1 | DPX165850DT-8085D3 | XCVR_DPX165850DT-8085D3 | U4 |
| 1 | HMC8410LP2FE | CP_6_9_ADI | U5 |
| 1 | ADL5507ACBZ | CB-6-14_ADI | U6 |
| 1 | 16MHz | Resonator_SMD_Murata_CSTxExxV-3Pin_3.0x1.1mm | Y1 |
| 1 | Conn_2x3 | PinHeader_2x03_P2.54mm_Vertical_SMD | J10 |
| 1 | Conn_01x06 | PinHeader_1x06_P2.54mm_Vertical_SMD_Pin1Left | J11 |
| 9 | Conn_Coaxial | SMA_Amphenol_132289_EdgeMount | JI1, JI2, JI3, JI4, JI5, JI6, JI7, JO8 +1 |
| 1 | Button | SW_SPST_3.9x2.9mm | SW1 |
| 1 | Green | LED_0805_2012Metric | PWR1 |
| 1 | 1N4148W | D_SOD-123 | D1 |
| 1 | Yellow | LED_0805_2012Metric | L1 |
| 1 | C | C_0402_1005Metric_Pad0.74x0.62mm_HandSolder | C1 |
| 13 | C | C_0402_1005Metric | C2, C3, C4, C5, C6, C7, C8, C9 +5 |
| 1 | 100 pF | C_0805_2012Metric_Pad1.18x1.45mm_HandSolder | C10 |
| 1 | 100nF | C_0603_1608Metric | C13 |
| 1 | 0.1 μF | C_0805_2012Metric_Pad1.18x1.45mm_HandSolder | C17 |
Show 6 more
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 3 | 1uF | C_0603_1608Metric | C18, C20, C21 |
| 1 | 4,7uF_16V | CP_EIA-3216-18_Kemet-A | C19 |
| 1 | 100nF | C_0805_2012Metric_Pad1.18x1.45mm_HandSolder | C22 |
| 1 | 51R | R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R1 |
| 1 | 10K | R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R2 |
| 2 | 1K | R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R3, R4 |
Minor project design files
The KiCad project lives in the ShmokeD/minor-project repository on GitHub; these links point at the commit this page was built from.
- LayoutMinor Project.kicad_pcb
- SchematicMinor Project.kicad_sch
Minor project: common questions
What microcontroller does the Minor project use?
The Minor project is built around the 328P-MUR, from the AVR/Arduino family.
How big is the Minor project PCB?
The Minor project measures 48 × 37.5 mm, has 4 copper layers and is 1.7104 mm thick.
How many components are on the Minor project?
50 components, from 26 distinct parts. The full bill of materials is listed on this page.
Where can I download the Minor project design files?
From the ShmokeD/minor-project repository on GitHub, which has the KiCad layout and the schematic; the links under Design files point to each one.
Can I use the Minor project design in my own project?
The repository has no license, so all rights stay with ShmokeD. Use it as a reference, and ask the author before reusing the design.
Can I test firmware for the Minor project without the hardware?
Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug AVR/Arduino firmware against it before you order a PCB.
Similar boards
AVR/Arduino
Magspoof
samyk
35 × 29 mm11 parts2LNo license4.2kAVR/Arduino
Redox keyboard
mattdibi
162.2 × 126.5 mm77 parts2LMIT2.0kAVR/Arduino
Labrador
espotek-org
36.8 × 34.7 mm75 parts2LNo license1.2kAVR/Arduino
ModuleV450
stuartpittaway
30 × 61.4 mm39 parts2LCC-BY-NC-4.01.1kAVR/Arduino
V4
stuartpittaway
30 × 50 mm38 parts2LCC-BY-NC-4.01.1kAVR/Arduino
Discipline
coseyfannitutti
304.9 × 122.8 mm170 parts2LCC-BY-NC-4.01.0k