STM32-V1

ShoDavid·STM32-V1

STM32-V1 PCB layout, top view — open source STM32 board by ShoDavid

About the STM32-V1 PCB

STM32-V1 is an open source STM32 PCB design by ShoDavid, published on GitHub. It is a 2-layer board measuring 36.8 × 36 mm, with 29 components from 17 distinct parts.

Its main chip is the STM32F103C8T6, from the STM32 family. Other key parts include the AMS1117-3.3. By type, the board carries 13 capacitors, 5 resistors, 4 connectors, 2 ICs, 2 switches and 1 crystal.

From the project

My first manufactured PCB! In this repository you can find the master files (KiCad 7) and the manufacturing files.

Main components on the STM32-V1

STM32-V1 bill of materials (BOM)

29 components, 17 distinct parts.

QtyPartRefs
1
AMS1117-3.3
U1
1
STM32F103C8T6
U2
1
16MHz
Y1
3
Conn_01x04_Pin
J1, J2, J3
1
USB_B_Micro
J4
1
SW_Push
SW1
1
SW_SPDT
SW2
1
RED
D1
1
120R
FB1
2
22u
C1, C2
2
10p
C3, C6
1
10u
C4
5
100n
C5, C7, C8, C9, C10
1
10n
C11
2
1u
C12, C13
4
1k5
R1, R2, R3, R5
1
10k
R4

STM32-V1 design files

The KiCad project lives in the ShoDavid/STM32-V1 repository on GitHub; these links point at the commit this page was built from.

STM32-V1: common questions

What microcontroller does the STM32-V1 use?

The STM32-V1 is built around the STM32F103C8T6, from the STM32 family.

How big is the STM32-V1 PCB?

The STM32-V1 measures 36.8 × 36 mm, has 2 copper layers and is 1.6 mm thick.

How many components are on the STM32-V1?

29 components, from 17 distinct parts. The full bill of materials is listed on this page.

Where can I download the STM32-V1 design files?

From the ShoDavid/STM32-V1 repository on GitHub, which has the KiCad layout and the schematic; the links under Design files point to each one.

Can I use the STM32-V1 design in my own project?

The repository has no license, so all rights stay with ShoDavid. Use it as a reference, and ask the author before reusing the design.

Can I test firmware for the STM32-V1 without the hardware?

Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug STM32 firmware against it before you order a PCB.

Similar boards