Neram thermal ditital twin

shreehannayak·neram-thermal-ditital-twin·hardware/schematics/channel_driver.kicad_sch

Neram thermal ditital twin

About the Neram thermal ditital twin PCB

Neram thermal ditital twin is an open source PCB design by shreehannayak, published on GitHub under the Apache-2.0 license. It is a board, with 14 components from 13 distinct parts.

Other key parts include the INA180A2IDBVR, LM393DR (1/2), SR latch (TBD) and 74LVC1G08 (TBD). By type, the board carries 4 ICs, 2 transistors, 2 connectors, 1 fuse, 1 relay and 1 switch.

From the project

Proof-of-concept prototype, not a medical device. All hardware in the demo is SIMULATED. Standards are design references only; no compliance is claimed. Every value has a source and a status (FROZEN, PROVISIONAL or TBD); unsourced values are TBD.

Proof-of-concept prototype, not a medical device. All hardware in the demo is SIMULATED. Standards are design references only; no compliance is claimed. Every value has a source and a status (FROZEN, PROVISIONAL or TBD); unsourced values are TBD.

Paper design; all hardware is SIMULATED in the demo and nothing has been built. Images are written by diagrams/makediagrams.py and schematics/makeschematic.py (the .drawio sources open at app.diagrams.net).

Main components on the Neram thermal ditital twin

Neram thermal ditital twin bill of materials (BOM)

14 components, 13 distinct parts.

QtyPartRefs
1
INA180A2IDBVR
U2
1
LM393DR (1/2)
U3
1
SR latch (TBD)
U4
1
74LVC1G08 (TBD)
U5
1
IRLML6344TRPBF
Q1
1
Coil driver (TBD)
Q2
1
M12A-08PFFS-SF8001 (to module CH_i)
J1
1
to NUCLEO-G474RE (layer 2)
J2
1
fuse_ch_A (TBD)
F1
1
Relay SPST-NO 24 V coil (TBD)
K1
2
TBD
R_REF1, R_REF2
1
RESET (manual, recessed)
SW1
1
Flyback diode (TBD)
D1

Neram thermal ditital twin design files

The KiCad project lives in the shreehannayak/neram-thermal-ditital-twin repository on GitHub; these links point at the commit this page was built from.

Neram thermal ditital twin: common questions

How many components are on the Neram thermal ditital twin?

14 components, from 13 distinct parts. The full bill of materials is listed on this page.

Where can I download the Neram thermal ditital twin design files?

From the shreehannayak/neram-thermal-ditital-twin repository on GitHub, which has the schematic; the links under Design files point to each one.

Can I use the Neram thermal ditital twin design in my own project?

Yes, under the terms of its Apache-2.0 license, which shreehannayak chose for the repository.