HardLabs

Irisbin

shrsauryam-spec·irisbin·Wiringdiagram/irs.kicad_sch

Irisbin

About the Irisbin PCB

Irisbin is an open source AVR/Arduino PCB design by shrsauryam-spec, published on GitHub. It is a board, with 4 components from 4 distinct parts.

Its main chip is the Arduino_Nano_v3.x, from the AVR/Arduino family. Other key parts include the HC-SR04. By type, the board carries 2 modules, 1 IC and 1 connector.

From the project

Automatic Mechanical Iris Bin

THE PROJECT DOES NOT USE A PCB. NORMAL WIRING WILL BE USED.

Main components on the Irisbin

HC-SR04Arduino_Nano_v3.x

Irisbin bill of materials (BOM)

4 components, 4 distinct parts — part numbers from the project's BOM.

QtyPartRefs
1
HC-SR04
U1
1
Arduino_Nano_v3.x
A1
1
Motor_Servo
M1
1
Conn_01x02_Pin
J1

Irisbin design files

The KiCad project lives in the shrsauryam-spec/irisbin repository on GitHub; these links point at the commit this page was built from.

Irisbin: common questions

What microcontroller does the Irisbin use?

The Irisbin is built around the Arduino_Nano_v3.x, from the AVR/Arduino family.

How many components are on the Irisbin?

4 components, from 4 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.

Where can I download the Irisbin design files?

From the shrsauryam-spec/irisbin repository on GitHub, which has the schematic and the BOM; the links under Design files point to each one.

Can I use the Irisbin design in my own project?

The repository has no license, so all rights stay with shrsauryam-spec. Use it as a reference, and ask the author before reusing the design.

Can I test firmware for the Irisbin without the hardware?

Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug AVR/Arduino firmware against it before you order a PCB.

Similar boards