IMU-Dev board

Shuri-101·IMU-Dev-board

IMU-Dev board layout, top view — open source STM32 board by Shuri-101

About the IMU-Dev board

IMU-Dev board is an open source STM32 PCB design by Shuri-101, published on GitHub. It is a 4-layer board measuring 57.4 × 51.4 mm, with 35 components from 16 distinct parts.

Its main chip is the STM32G431CBTx, from the STM32 family. Other key parts include the LSM6DS3TR-C (Pin 7 --> GND) and AMS1117-3.3. By type, the board carries 15 capacitors, 12 resistors, 4 connectors and 3 ICs.

It belongs with the sensors and dev boards & breakouts designs in this gallery.

From the project

Hello, this is just a project for me to get some experience and learn about data busses like SPI (Serial Peripheral Interface), UART (Universal Asynchronous Receiver/Transmitter) and I2C (Inter-Integrated Circuit) and learn how to program sensors like IMUs, barometers, altimeters

Hello, this is just a project for me to get some experience and learn about data busses like SPI (Serial Peripheral Interface), UART (Universal Asynchronous Receiver/Transmitter) and I2C (Inter-Integrated Circuit) and learn how to program sensors like IMUs, barometers, altimeters, GPS etc. This because I hope to design a flight computer for a drone or active stabilized rocket so yeah.

IMU-Dev board, from the project README
From the project README

Main components on the IMU-Dev board

STM32G431CBTxLSM6DS3TR-C (Pin 7 --> GND)AMS1117-3.3

IMU-Dev board bill of materials (BOM)

35 components, 16 distinct parts — part numbers from the project's BOM.

QtyPartRefs
1
STM32G431CBTx
U1
1
LSM6DS3TR-C (Pin 7 --> GND)
U2
1
AMS1117-3.3
U13
1
Conn_01x05_Pin
J1
2
Conn_02x08_Odd_Even
J3, J4
1
Conn_01x04_Pin
J7
1
HC-TYPE-C-6P-01A
HCTL(华灿天禄)
USB1
2
22uF
C21, C22
9
100nF
C23, C24, C25, C26, C28, C30, C33, C34 +1
1
4.7uF
C27
2
1uF
C29, C32
1
10nF
C31
2
5.1K
R1, R2
2
470
R16, R18
4
4.7k
R19, R20, R23, R24
4
10k
R22, R26, R27, R28

IMU-Dev board design files

The KiCad project lives in the Shuri-101/IMU-Dev-board repository on GitHub; these links point at the commit this page was built from.

IMU-Dev board: common questions

What microcontroller does the IMU-Dev board use?

The IMU-Dev board is built around the STM32G431CBTx, from the STM32 family.

How big is the IMU-Dev board?

The IMU-Dev board measures 57.4 × 51.4 mm, has 4 copper layers and is 1.6 mm thick.

How many components are on the IMU-Dev board?

35 components, from 16 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.

Where can I download the IMU-Dev board design files?

From the Shuri-101/IMU-Dev-board repository on GitHub, which has the KiCad layout, the schematic and the BOM; the links under Design files point to each one.

Can I use the IMU-Dev board design in my own project?

The repository has no license, so all rights stay with Shuri-101. Use it as a reference, and ask the author before reusing the design.

Can I test firmware for the IMU-Dev board without the hardware?

Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug STM32 firmware against it before you order a PCB.

Similar boards