PCB-Designer-Intern-Assessment-

SID-nakati·PCB-Designer-Intern-Assessment-·Hardware/STM 32.kicad_pcb

PCB-Designer-Intern-Assessment- layout, top view — open source STM32 board by SID-nakati

About the PCB-Designer-Intern-Assessment-

PCB-Designer-Intern-Assessment- is an open source STM32 PCB design by SID-nakati, published on GitHub. It is a 2-layer board measuring 42 × 27 mm, with 16 components from 11 distinct parts.

Its main chip is the STM32G0B1CBTx, from the STM32 family. Other key parts include the Voltage Regulator. By type, the board carries 6 capacitors, 5 resistors, 1 IC, 1 crystal and 1 diode.

From the project

This repository contains the complete submission for the internship assessment, covering both hardware (PCB design) and software (embedded C coding) tasks.

2) Software - Embedded C / C++ Projects: ----------------------------------------- - The "software" folder contains: A C++ program file to reverse the words in a string. A C++ program file to blink an LED at three different speeds in a continuous cycle. * A video demonstrating the LED blinking simulation on Tinkercad.

All source codes are well commented explaining the key logic.

Main components on the PCB-Designer-Intern-Assessment-

PCB-Designer-Intern-Assessment- bill of materials (BOM)

16 components, 11 distinct parts — part numbers from the project's BOM.

QtyPartRefs
1
Voltage Regulator
U2
1
16MHz
Y1
1
I2C
I2C
1
STM32G0B1CBTx
STM32
1
LED
D1
2
100nF
C1, C2
2
20pF
C3, C5
2
22uF
C4, C6
2
5.1k
R1, R2
1
330
R3
2
4.7k
R4, R5

PCB-Designer-Intern-Assessment- design files

The KiCad project lives in the SID-nakati/PCB-Designer-Intern-Assessment- repository on GitHub; these links point at the commit this page was built from.

PCB-Designer-Intern-Assessment-: common questions

What microcontroller does the PCB-Designer-Intern-Assessment- use?

The PCB-Designer-Intern-Assessment- is built around the STM32G0B1CBTx, from the STM32 family.

How big is the PCB-Designer-Intern-Assessment-?

The PCB-Designer-Intern-Assessment- measures 42 × 27 mm, has 2 copper layers and is 1.6 mm thick.

How many components are on the PCB-Designer-Intern-Assessment-?

16 components, from 11 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.

Where can I download the PCB-Designer-Intern-Assessment- design files?

From the SID-nakati/PCB-Designer-Intern-Assessment- repository on GitHub, which has the KiCad layout, the schematic and the BOM; the links under Design files point to each one.

Can I use the PCB-Designer-Intern-Assessment- design in my own project?

The repository has no license, so all rights stay with SID-nakati. Use it as a reference, and ask the author before reusing the design.

Can I test firmware for the PCB-Designer-Intern-Assessment- without the hardware?

Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug STM32 firmware against it before you order a PCB.

Similar boards