4 open source boards using the Voltage Regulator

Real designs built with the Voltage Regulator, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.

4 boardsClear filters|Most starred

The Voltage Regulator in open source designs

The gallery holds 4 open source boards using the Voltage Regulator from 4 GitHub repositories; a typical one measures about 50.7 × 48.4 mm and carries around 38 components.

100% are two-layer designs, the rest use four layers or more, and 25% carry an open source license.

The most starred is BareTag Anchor by WaltTeb.

Microcontrollers on boards using the Voltage Regulator

Voltage Regulator: common questions

Where can I find a Voltage Regulator reference design?

Each of the 4 boards on this page is a real design using the Voltage Regulator. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.

Which microcontrollers do boards using the Voltage Regulator use?

Most are built on STM32 (2) and RP2040/RP2350 (1).

How big is a typical board using the Voltage Regulator?

The median is 50.7 × 48.4 mm, and 100% are two-layer designs.

What is the most popular open source board using the Voltage Regulator?

By GitHub stars, BareTag Anchor by WaltTeb, with 3 stars.

Can I simulate one of these boards using the Voltage Regulator before building it?

Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.

Browse boards by part