Acorn 1mhz bus pi if

simoninns·acorn_1mhz_bus_pi_if·kicad/Acorn_1Mhz_bus_PiZero_interface.kicad_pcb

Acorn 1mhz bus pi if PCB layout, top view — open source board by simoninns

About the Acorn 1mhz bus pi if PCB

Acorn 1mhz bus pi if is an open source PCB design by simoninns, published on GitHub under the GPL-3.0 license. It is a 4-layer board measuring 65 × 30 mm, with 30 components from 14 distinct parts.

Other key parts include the XC6206P332MR and NC7WZ16. By type, the board carries 11 resistors, 9 diodes, 5 capacitors, 3 connectors and 2 ICs.

From the project

Acorn BBC Micro/Master 1 MHz bus to Raspberry Pi Zero interface

Since the BBC Micro is 5Vs and the Pi is 3.3Vs bi-directional level shifting is required. In addition, the board provides an active audio buffer to allow the Pi Zero to output audio via the GPIO header. Audio is routed into the BBC Micro if the audio jack isn't required.

https://github.com/simoninns/acorn1mhzbuspiif/tree/main/kicad/jlcpcb

This is free software: you can redistribute it and/or modify it under the terms of the GNU General Public License as published by the Free Software Foundation, either version 3 of the License, or (at your option) any later version.

Main components on the Acorn 1mhz bus pi if

Acorn 1mhz bus pi if bill of materials (BOM)

30 components, 14 distinct parts — part numbers from the project's BOM.

QtyPartRefs
1
XC6206P332MR
U1
1
NC7WZ16
U2
1
C20920
1MHz Bus
J1
1
AUDIO_JACK_3420
Audio_Jack_3420
J3
1
C514173
Power In
J6
9
MMBD4148TW
D1, D2, D3, D4, D5, D6, D7, D8 +1
2
1UF
1uF
C1, C2
2
100NF
100nF
C3, C4
1
47UF
47uF
C5
2
100R
R1, R4
1
470R
R2
1
220R
R3
1
1K8
R5
6
100R
RN1, RN2, RN3, RN4, RN5, RN6

Acorn 1mhz bus pi if design files

The KiCad project lives in the simoninns/acorn_1mhz_bus_pi_if repository on GitHub; these links point at the commit this page was built from.

Acorn 1mhz bus pi if: common questions

How big is the Acorn 1mhz bus pi if PCB?

The Acorn 1mhz bus pi if measures 65 × 30 mm, has 4 copper layers and is 1.6 mm thick.

How many components are on the Acorn 1mhz bus pi if?

30 components, from 14 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.

Where can I download the Acorn 1mhz bus pi if design files?

From the simoninns/acorn_1mhz_bus_pi_if repository on GitHub, which has the KiCad layout, the schematic and the BOM; the links under Design files point to each one.

Can I use the Acorn 1mhz bus pi if design in my own project?

Yes, under the terms of its GPL-3.0 license, which simoninns chose for the repository.