203 open source boards using the XC6206P332MR

Real designs built with the XC6206P332MR, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.

203 boardsClear filters|Most starred

How designs wire the XC6206P332MR

Read from the KiCad layouts of 145 open source designs, one per repository: what each pin of the XC6206P332MR connects to, and the resistors, capacitors and other passives placed on it.

  • The VI pin has a decoupling capacitor on 127 of 145 designs, most often 1 µF (then 10 µF).
  • The VO pin has a decoupling capacitor on 122 of 145 designs, most often 1 µF (then 100 nF).
GNDpin 1Connected to: GND 93%
VOpin 2Connected to: 3.3V 86%
  • Decoupling capacitor on 84% · 1 µF (82), 100 nF (50), 10 µF (43)
VIpin 3Connected to: 5V 79% · a signal 20%
  • Decoupling capacitor on 88% · 1 µF (82), 10 µF (37), 100 nF (33)

Connections count pins, parts count designs; values in brackets are how many parts had that value. Designs read include Easyduino RP2040 by Hanqaqa, Dml20m by jonnor, Yaemk split kb by KarlK90 and Micro rusEFI by rusefi.

The XC6206P332MR in open source designs

The gallery holds 203 open source boards using the XC6206P332MR from 150 GitHub repositories; a typical one measures about 67.3 × 56 mm and carries around 65 components.

69% are two-layer designs, the rest use four layers or more, and 45% carry an open source license.

The most starred is Easyduino RP2040 by Hanqaqa.

Microcontrollers on boards using the XC6206P332MR

XC6206P332MR: common questions

Where can I find a XC6206P332MR reference design?

Each of the 203 boards on this page is a real design using the XC6206P332MR. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.

What decoupling capacitors do designs use on the XC6206P332MR VI pin?

The VI pin has a decoupling capacitor on 127 of 145 designs, most often 1 µF (then 10 µF). Counted from the KiCad layouts of 145 open source designs using the XC6206P332MR.

What decoupling capacitors do designs use on the XC6206P332MR VO pin?

The VO pin has a decoupling capacitor on 122 of 145 designs, most often 1 µF (then 100 nF). Counted from the KiCad layouts of 145 open source designs using the XC6206P332MR.

What parts are used alongside the XC6206P332MR?

The USBLC6-2SC6, RP2040, SRV05-4, W25Q128JVSIQ and W25Q128JVS appear in the most repositories here.

Which microcontrollers do boards using the XC6206P332MR use?

Most are built on STM32 (87), RP2040/RP2350 (35), RISC-V (7) and ESP32 (7).

How big is a typical board using the XC6206P332MR?

The median is 67.3 × 56 mm, and 69% are two-layer designs.

What is the most popular open source board using the XC6206P332MR?

By GitHub stars, Easyduino RP2040 by Hanqaqa, with 754 stars.

Can I simulate one of these boards using the XC6206P332MR before building it?

Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.

Browse boards by part