Variable frequency drive induction motor
SimonSchaeff·variable-frequency-drive-induction-motor·hardware/vfd.kicad_pcb
About the Variable frequency drive induction motor PCB
Variable frequency drive induction motor is an open source PCB design by SimonSchaeff, published on GitHub. It is a 4-layer board measuring 282 × 112 mm, with 107 components from 44 distinct parts.
Other key parts include the IM523L6AXKMA1, INA240A3D and MC78M12BDTRKG. By type, the board carries 44 resistors, 36 capacitors, 8 connectors, 6 diodes, 5 ICs and 1 transistor.
It belongs with the iot & wireless and displays & leds designs in this gallery.
From the project
This repository contains the hardware and software design files for a frequency inverter for asynchronous motors up to 3 kW, developed as part of a university project at Munich University of Applied Sciences. It includes the KiCad schematics and PCB layouts, as well as the corresponding software.
This repository contains the development files for a custom-built frequency inverter developed as part of a university project at Munich University of Applied Sciences (Hochschule München).
The power electronics and control electronics were designed using KiCad. The corresponding hardware design files are located in the hardware/ directory. The software is based on an STM32 microcontroller, and the firmware source code is available in the sourcecode/` directory.
Main components on the Variable frequency drive induction motor
Variable frequency drive induction motor bill of materials (BOM)
107 components, 44 distinct parts — part numbers from the project's BOM.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | IM523L6AXKMA1 | IM523L6AXKMA1 | IC1 |
| 3 | INA240A3D | SOIC-8_3.9x4.9mm_P1.27mm | U1, U2, U3 |
| 1 | MC78M12BDTRKG | DPAK-3_ONS | U4 |
| 1 | BC337 | TO-92_Inline | Q1 |
| 2 | 2604-1103 | 26041103 | J1, J4 |
| 1 | Conn_01x06_Socket | PinSocket_1x06_P2.54mm_Vertical | J2 |
| 1 | 66.9040-22 | 66904022 | J3 |
| 1 | 66.9040-21 | 66904021 | J5 |
| 1 | MC000034 | MC000034 | J6 |
| 2 | 61304021821 | RHDR40W97P254X254_2X20_5130X508X860P | J7, J8 |
| 2 | SC52-11SURKWA | SC5211SURKWA | DS1, DS2 |
| 1 | T9GV5L14-15 | T9GV5L1415 | K1 |
| 1 | IRM-10-15 | Converter_ACDC_MeanWell_IRM-10-xx_THT | PS1 |
| 1 | 5k | PC16SV-10IP06-103A2020-TA_PHR | RV1 |
| 1 | TL1105YF160Q | TL1105YF160Q | S1 |
| 1 | 1N5352B-TP | DIOAD1910W90L670D310 | Z1 |
| 4 | 10A10-T | DIOAD4425W130L885D885 | D1, D2, D4, D5 |
| 1 | 1N4007 | D_DO-41_SOD81_P10.16mm_Horizontal | D3 |
| 1 | LED | LED_0805_2012Metric | D6 |
| 9 | 100nF | C_0603_1608Metric | C1, C3, C7, C9, C20, C21, C23, C28 +1 |
Show 24 more
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 4 | 10uF | C_1206_3216Metric | C2, C4, C6, C8 |
| 1 | 4.7 nF | C_0603_1608Metric | C5 |
| 5 | LGU2W471MELC | CAPPRD1000W190D3550H5200 | C10, C11, C12, C13, C14 |
| 8 | 10nF | C_0603_1608Metric | C15, C16, C17, C18, C19, C22, C24, C26 |
| 1 | C 1nF | C_0603_1608Metric | C25 |
| 6 | 220pF | C_0603_1608Metric | C27, C29, C30, C31, C32, C33 |
| 1 | 330nF | C_0603_1608Metric | C35 |
| 1 | 1uF | C_0603_1608Metric | C36 |
| 9 | 1k | R_0603_1608Metric | R1, R2, R3, R5, R6, R7, R8, R9 +1 |
| 1 | 1 | R_0603_1608Metric | R4 |
| 1 | R 1k | R_0603_1608Metric | R11 |
| 1 | EP5WS47RJ | RESAD5900W80L2500D850 | R12 |
| 1 | R 100k | R_0603_1608Metric | R13 |
| 3 | WSLF25123L000FEA | RESC6430X48N | R14, R15, R16 |
| 3 | 3.9k | R_0603_1608Metric | R17, R18, R19 |
| 3 | R 15k | R_0603_1608Metric | R20, R22, R24 |
| 3 | R 12k | R_0603_1608Metric | R21, R23, R25 |
| 1 | R 33k | R_0603_1608Metric | R26 |
| 1 | R 100 | R_0603_1608Metric | R27 |
| 5 | 100 | R_0603_1608Metric | R28, R30, R31, R32, R35 |
| 2 | 10k | R_0603_1608Metric | R29, R33 |
| 1 | 470R | R_0603_1608Metric | R34 |
| 2 | 100R | R_0603_1608Metric | R36, R37 |
| 7 | 150 | R_0603_1608Metric | R38, R39, R40, R41, R42, R43, R44 |
Variable frequency drive induction motor design files
The KiCad project lives in the SimonSchaeff/variable-frequency-drive-induction-motor repository on GitHub; these links point at the commit this page was built from.
Variable frequency drive induction motor: common questions
How big is the Variable frequency drive induction motor PCB?
The Variable frequency drive induction motor measures 282 × 112 mm, has 4 copper layers and is 1.67 mm thick.
How many components are on the Variable frequency drive induction motor?
107 components, from 44 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.
Where can I download the Variable frequency drive induction motor design files?
From the SimonSchaeff/variable-frequency-drive-induction-motor repository on GitHub, which has the KiCad layout, the schematic and the BOM; the links under Design files point to each one.
Can I use the Variable frequency drive induction motor design in my own project?
The repository has no license, so all rights stay with SimonSchaeff. Use it as a reference, and ask the author before reusing the design.
Similar boards
BM28B0.6-24DSBreakout
scottbez1
15.2 × 35.6 mm3 parts2LApache-2.022.2kLevelShifterBreakout
scottbez1
15.2 × 20.3 mm5 parts2LApache-2.022.2kView base
scottbez1
81.2 × 81.2 mm81 parts2LApache-2.022.2kView screen
scottbez1
35 × 35 mm12 parts2LApache-2.022.2kDisplay eval
byrantech
52.1 × 22.6 mm12 parts4LMIT4.3kChainlinkBase
scottbez1
98.4 × 190.5 mm119 parts2LApache-2.04.2k