Bluepill board
SinaKarvandi·PCB-Designs·bluepill_board/bluepill_board.kicad_pcb
About the Bluepill board
Bluepill board is an open source STM32 PCB design by SinaKarvandi, published on GitHub under the GPL-3.0 license. It is a 2-layer board measuring 41 × 36 mm, with 28 components from 16 distinct parts.
Its main chip is the STM32F103C8T6, from the STM32 family. Other key parts include the AMS1117-3.3. By type, the board carries 13 capacitors, 5 resistors, 4 connectors, 2 ICs, 1 crystal and 1 switch.
From the project
Blue Pill PCB
Custom PCB design for STM32 "Blue Pill" development board.
Schematic and layout for ESP32-S3-based design.
Simple circuit for testing LEDs and basic PCB workflow.
Main components on the Bluepill board
Bluepill board bill of materials (BOM)
28 components, 16 distinct parts.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | AMS1117-3.3 | SOT-223-3_TabPin2 | U1 |
| 1 | STM32F103C8T6 | LQFP-48_7x7mm_P0.5mm | U2 |
| 1 | 16MHz | Crystal_SMD_3225-4Pin_3.2x2.5mm | Y1 |
| 3 | Conn_01x04_Male | PinHeader_1x04_P2.54mm_Vertical | J1, J2, J3 |
| 1 | USB_B_Micro | USB_Micro-B_Wuerth_629105150521 | J4 |
| 1 | SW_SPDT | SW_SPDT_PCM12 | SW1 |
| 1 | RED | LED_0603_1608Metric | D1 |
| 1 | 120R | L_0603_1608Metric | FB1 |
| 2 | 22u | C_0805_2012Metric | C1, C2 |
| 5 | 100n | C_0402_1005Metric | C3, C6, C7, C9, C10 |
| 1 | 10u | C_0603_1608Metric | C4 |
| 2 | 10p | C_0402_1005Metric | C5, C8 |
| 1 | 10n | C_0402_1005Metric | C11 |
| 2 | 1u | C_0402_1005Metric | C12, C13 |
| 4 | 1k5 | R_0402_1005Metric | R1, R2, R3, R5 |
| 1 | 10k | R_0402_1005Metric | R4 |
Bluepill board design files
The KiCad project lives in the SinaKarvandi/PCB-Designs repository on GitHub; these links point at the commit this page was built from.
Bluepill board: common questions
What microcontroller does the Bluepill board use?
The Bluepill board is built around the STM32F103C8T6, from the STM32 family.
How big is the Bluepill board?
The Bluepill board measures 41 × 36 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the Bluepill board?
28 components, from 16 distinct parts. The full bill of materials is listed on this page.
Where can I download the Bluepill board design files?
From the SinaKarvandi/PCB-Designs repository on GitHub, which has the KiCad layout and the schematic; the links under Design files point to each one.
Can I use the Bluepill board design in my own project?
Yes, under the terms of its GPL-3.0 license, which SinaKarvandi chose for the repository.
Can I test firmware for the Bluepill board without the hardware?
Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug STM32 firmware against it before you order a PCB.
More boards in PCB-Designs
Similar boards
STM32
LumenPnP Motherboard
opulo-inc
149 × 95 mm296 parts4LCC-BY-SA-4.03.7kSTM32
Type g
google
169 × 30 mm24 parts2LApache-2.02.9kSTM32
Main panel
google
234 × 84 mm26 parts4LApache-2.02.9kSTM32
Base
google
52.3 × 52.3 mm36 parts2LApache-2.02.9kSTM32
Type a
google
150 × 30 mm14 parts2LApache-2.02.9kSTM32
Type c
google
188 × 30 mm17 parts2LApache-2.02.9k