SNES-Arcade-Controller
Sirotaca·SNES-Arcade-Controller-PCB·KiCad/Arcade-Controller-SNES.kicad_pcb
About the SNES-Arcade-Controller PCB
SNES-Arcade-Controller is an open source AVR/Arduino PCB design by Sirotaca, published on GitHub under the CC0-1.0 license. It is a 2-layer board measuring 70 × 46 mm, with 13 components from 7 distinct parts.
Its main chip is the ARDUINO_NANO_V3.X, from the AVR/Arduino family. Other key parts include the CD4021BE and 74HCT00. By type, the board carries 4 ICs, 4 capacitors, 2 connectors, 2 resistors and 1 module.
From the project
PCB for DIY arcade-style controllers for SNES
Main components on the SNES-Arcade-Controller
SNES-Arcade-Controller bill of materials (BOM)
13 components, 7 distinct parts — part numbers from the project's BOM.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 2 | CD4021BE | DIP-16_W7.62mm | U1, U2 |
| 2 | 74HCT00 | DIP-14_W7.62mm | U3, U4 |
| 1 | ARDUINO_NANO_V3.X Arduino_Nano_v3.x | Arduino_Nano | A1 |
| 1 | CONN_01X05 Conn_01x05 | PinHeader_1x05_P2.54mm_Vertical | J1 |
| 1 | CONN_02X10_ODD_EVEN Conn_02x10_Odd_Even | PinHeader_2x10_P2.54mm_Vertical | J2 |
| 4 | 0.1U 0.1u | R_Axial_DIN0207_L6.3mm_D2.5mm_P7.62mm_Horizontal | C1, C2, C3, C4 |
| 2 | 10K 10k | R_Array_SIP9 | RN1, RN2 |
SNES-Arcade-Controller design files
The KiCad project lives in the Sirotaca/SNES-Arcade-Controller-PCB repository on GitHub; these links point at the commit this page was built from.
SNES-Arcade-Controller: common questions
What microcontroller does the SNES-Arcade-Controller use?
The SNES-Arcade-Controller is built around the ARDUINO_NANO_V3.X, from the AVR/Arduino family.
How big is the SNES-Arcade-Controller PCB?
The SNES-Arcade-Controller measures 70 × 46 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the SNES-Arcade-Controller?
13 components, from 7 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.
Where can I download the SNES-Arcade-Controller design files?
From the Sirotaca/SNES-Arcade-Controller-PCB repository on GitHub, which has the KiCad layout, the schematic and the BOM; the links under Design files point to each one.
Can I use the SNES-Arcade-Controller design in my own project?
Yes, under the terms of its CC0-1.0 license, which Sirotaca chose for the repository.
Can I test firmware for the SNES-Arcade-Controller without the hardware?
Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug AVR/Arduino firmware against it before you order a PCB.
Similar boards
AVR/Arduino
Magspoof
samyk
35 × 29 mm11 parts2LNo license4.2kAVR/Arduino
Redox keyboard
mattdibi
162.2 × 126.5 mm77 parts2LMIT2.0kAVR/Arduino
Labrador
espotek-org
36.8 × 34.7 mm75 parts2LNo license1.2kAVR/Arduino
ModuleV450
stuartpittaway
30 × 61.4 mm39 parts2LCC-BY-NC-4.01.1kAVR/Arduino
V4
stuartpittaway
30 × 50 mm38 parts2LCC-BY-NC-4.01.1kAVR/Arduino
Discipline
coseyfannitutti
304.9 × 122.8 mm170 parts2LCC-BY-NC-4.01.0k