Picoscope-24v logic analyser
About the Picoscope-24v logic analyser PCB
Picoscope-24v logic analyser is an open source PCB design by siyka-au, published on GitHub. It is a 2-layer board measuring 60 × 86 mm, with 51 components from 14 distinct parts.
By type, the board carries 24 diodes, 24 resistors and 3 connectors.
It belongs with the test & measurement designs in this gallery.
From the project
PicoScope 24V logic analyser
Picoscope-24v logic analyser bill of materials (BOM)
51 components, 14 distinct parts — part numbers from the project's BOM.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | Screw_Terminal_01x09 | PhoenixContact_MCV_1,5_9-G-3.81_1x09_P3.81mm_Vertical | J1 |
| 2 | Conn_02x10_Odd_Even | IDC-Header_2x10_P2.54mm_Vertical | J2, J3 |
| 3 | C84256 D | D_SOD-123F | D1, D7, D13 |
| 4 | C64898 R | D_0805_2012Metric | D2, D8, D11, D14 |
| 4 | C8062 D | D_SOD-123F | D3, D9, D12, D15 |
| 3 | C84256 R | D_0805_2012Metric | D4, D10, D16 |
| 1 | C64898 D | D_SOD-123F | D5 |
| 1 | C8062 R | D_0805_2012Metric | D6 |
| 3 | C64898 5,6V | D_MiniMELF | D17, D20, D23 |
| 3 | C8062 5,6V | D_MiniMELF | D18, D21, D24 |
| 2 | C84256 5,6V | D_MiniMELF | D19, D22 |
| 8 | 3.9K 1k | R_1812_4532Metric | R1, R2, R5, R10, R14, R16, R19, R22 |
| 8 | 3.9k | R_1812_4532Metric | R3, R6, R9, R12, R15, R18, R21, R24 |
| 8 | 3.9K 3.9k | R_1812_4532Metric | R4, R7, R8, R11, R13, R17, R20, R23 |
Picoscope-24v logic analyser design files
The KiCad project lives in the siyka-au/picoscope-24v-logic-analyser repository on GitHub; these links point at the commit this page was built from.
- Layout24v-logic.kicad_pcb
- Schematic24v-logic.kicad_sch
- BOMproduction/24v-logic-bom.xlsx
Picoscope-24v logic analyser: common questions
How big is the Picoscope-24v logic analyser PCB?
The Picoscope-24v logic analyser measures 60 × 86 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the Picoscope-24v logic analyser?
51 components, from 14 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.
Where can I download the Picoscope-24v logic analyser design files?
From the siyka-au/picoscope-24v-logic-analyser repository on GitHub, which has the KiCad layout, the schematic and the BOM; the links under Design files point to each one.
Can I use the Picoscope-24v logic analyser design in my own project?
The repository has no license, so all rights stay with siyka-au. Use it as a reference, and ask the author before reusing the design.
Similar boards
LevelShifter
gusmanb
28.3 × 39.8 mm21 parts2LGPL-3.05.0k
StackLink
52.3 × 10.5 mm5 parts2LGPL-3.05.0k
AnalyzerBoxPCB fork
52.7 × 47.9 mm54 parts4LGPL-3.05.0k
EleLab v2 Bus100
Chrismettal
100 × 100 mm37 parts2LGPL-3.0528
EleLab v2 Bus150
150 × 50 mm37 parts2LGPL-3.0528
EleLab v2 PowerFeed
68 × 50 mm11 parts2LGPL-3.0528