Oragepi holder
About the Oragepi holder PCB
Oragepi holder is an open source PCB design by slomkowski, published on GitHub under the MIT license. It is a 2-layer board measuring 96.5 × 64.8 mm, with 43 components from 22 distinct parts.
Other key parts include the orange_pi_zero and DAC5573. By type, the board carries 15 resistors, 8 capacitors, 7 connectors, 4 transistors, 3 switches and 2 ICs.
It belongs with the displays & leds designs in this gallery.
From the project
Fallout-inspired post-pocalyptic display.
Design files of Octoglow, the post-apocalyptic desktop display device. Detailed article published on my website.
Main components on the Oragepi holder
Oragepi holder bill of materials (BOM)
43 components, 22 distinct parts.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | orange_pi_zero | orangepi-zero | U1 |
| 1 | DAC5573 | TSSOP-16_4.4x5mm_Pitch0.65mm | U2 |
| 2 | BD227 | TO-126_Vertical | Q1, Q2 |
| 2 | BSN10A | TO-92_Molded_Wide_Oval | Q3, Q4 |
| 2 | Conn_01x02_Male | Pin_Header_Angled_1x02_Pitch2.54mm | J1, J2 |
| 4 | Conn_02x05_Odd_Even | IDC-Header_2x05_P2.54mm_Vertical | J3, J4, J5, J6 |
| 1 | Conn_02x02_Odd_Even | 0-215464-4_TH_4-pin_male | J7 |
| 2 | Lamp | Pin_Header_Straight_1x02_Pitch2.00mm | LA1, LA2 |
| 2 | 1k | SP5-2 | RV1, RV2 |
| 1 | SW_SPST | SPDT | SW1 |
| 1 | SW_Push | SPDT | SW2 |
| 1 | SW_DPDT_x2 | APEM_5246 | SW3 |
| 5 | 100n | C_1206_HandSoldering | C1, C3, C5, C6, C8 |
| 2 | 47u | CP_Radial_D7.5mm_P2.50mm | C2, C4 |
| 1 | 1000u | CP_Axial_L30.0mm_D10.0mm_P35.00mm_Horizontal | C7 |
| 4 | 1k | R_1206_HandSoldering | R1, R2, R3, R4 |
| 2 | 470 | R_1206_HandSoldering | R5, R6 |
| 2 | 4k7 | R_1206_HandSoldering | R7, R10 |
| 2 | 27 | R_Axial_DIN0414_L11.9mm_D4.5mm_P15.24mm_Horizontal | R8, R12 |
| 2 | 3k6 | R_Axial_DIN0411_L9.9mm_D3.6mm_P15.24mm_Horizontal | R9, R11 |
Show 2 more
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 2 | 10k | R_Axial_DIN0411_L9.9mm_D3.6mm_P15.24mm_Horizontal | R13, R14 |
| 1 | 4k7 | R_Axial_DIN0411_L9.9mm_D3.6mm_P15.24mm_Horizontal | R15 |
Oragepi holder design files
The KiCad project lives in the slomkowski/octoglow repository on GitHub; these links point at the commit this page was built from.
Oragepi holder: common questions
How big is the Oragepi holder PCB?
The Oragepi holder measures 96.5 × 64.8 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the Oragepi holder?
43 components, from 22 distinct parts. The full bill of materials is listed on this page.
Where can I download the Oragepi holder design files?
From the slomkowski/octoglow repository on GitHub, which has the KiCad layout and the schematic; the links under Design files point to each one.
Can I use the Oragepi holder design in my own project?
Yes, under the terms of its MIT license, which slomkowski chose for the repository.
More boards in octoglow
Similar boards
LevelShifterBreakout
scottbez1
15.2 × 20.3 mm5 parts2LApache-2.022.2k
View base
81.2 × 81.2 mm81 parts2LApache-2.022.2k
View screen
35 × 35 mm12 parts2LApache-2.022.2k
BM28B0.6-24DSBreakout
15.2 × 35.6 mm3 parts2LApache-2.022.2k
ChainlinkDriverTester
198.1 × 95.3 mm123 parts2LApache-2.04.2k
ChainlinkBase
98.4 × 190.5 mm119 parts2LApache-2.04.2k