Matching network modules
About the Matching network modules PCB
Matching network modules is an open source PCB design by SmittyHalibut, published on GitHub. It is a 2-layer board measuring 44.5 × 69.9 mm, with 9 components from 5 distinct parts.
By type, the board carries 6 capacitors, 2 inductors and 1 connector.
From the project
Notes and files for my BayCon 2021 presentation Raw data, and analysis of data, from NanoVNA Saver of my build of this antenna. Diagram for full switching network OpenSCAD and .stl files for my top-of-mast spreader bracket
Matching network modules bill of materials (BOM)
9 components, 5 distinct parts.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | Conn_02x02_Top_Bottom | MatchingNetworkModule | J1 |
| 2 | L_Core_Ferrite | L_Toroid_Vertical_L41.9mm_W19.1mm_P15.80mm_Vishay_TJ7 | L1, L2 |
| 2 | C_Small | C_Rect_L7.0mm_W3.5mm_P5.00mm | C1, C4 |
| 2 | C_Small | C_Rect_L10.0mm_W4.0mm_P7.50mm_FKS3_FKP3 | C2, C5 |
| 2 | C_Small | C_Rect_L13.0mm_W5.0mm_P10.00mm_FKS3_FKP3_MKS4 | C3, C6 |
Matching network modules design files
The KiCad project lives in the SmittyHalibut/DoubleDeltaSlotAntenna repository on GitHub; these links point at the commit this page was built from.
Matching network modules: common questions
How big is the Matching network modules PCB?
The Matching network modules measures 44.5 × 69.9 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the Matching network modules?
9 components, from 5 distinct parts. The full bill of materials is listed on this page.
Where can I download the Matching network modules design files?
From the SmittyHalibut/DoubleDeltaSlotAntenna repository on GitHub, which has the KiCad layout; the links under Design files point to each one.
Can I use the Matching network modules design in my own project?
The repository has no license, so all rights stay with SmittyHalibut. Use it as a reference, and ask the author before reusing the design.
