TALAVERA v1 - Control Station Board
sofi1209·TALAVERA-v1-TestBench·hardware/talavera-station/talavera-station.kicad_pcb
About the TALAVERA v1 - Control Station Board
TALAVERA v1 - Control Station Board is an open source PCB design by sofi1209, published on GitHub under the MIT license. It is a 2-layer board measuring 80 × 60 mm, with 51 components from 40 distinct parts.
By type, the board carries 1 relay and 1 speaker.
From the project
Static test bench electronics for solid rocket motors. Hardware-only arming, firing and e-stop - no microcontroller on the safety path. Successor to Wirikuta 1.1. Ignitia Rocket Lab.
KiCad projects for the two TALAVERA boards.
Both are flat single sheets with net-label connectivity rather than hierarchical sheets. At this size that is easier to review than nine sub-sheets, and every block is boxed and titled.
The .kicadsch files are produced by tools/genbench.py and tools/genstation.py on top of tools/ksch.py, which reads symbol definitions straight out of the installed KiCad libraries and flattens extends` inheritance. Regenerate with:
TALAVERA v1 - Control Station Board bill of materials (BOM)
51 components, 40 distinct parts — part numbers from the project's BOM.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 4 | 100nF | C_485, C_ISO1, C_USB1, C_V3 | |
| 1 | 100nF DNP | C_ISO2 | |
| 1 | 10uF 25V | C_STN1 | |
| 2 | 22uF assumed | C_STN2, C_STN3 | |
| 1 | ARMED | D_ARMED1 | |
| 2 | 1N4148W | D_BUZZ1, D_K5 | |
| 1 | CONTINUITY OK | D_CONT1 | |
| 2 | ESD9B5.0ST5G | D_ESD1, D_ESD2 | |
| 1 | POWER | D_PWR1 | |
| 1 | TBD O-17 | F_STN1 | |
| 1 | +12V feed | J_12V1 | |
| 1 | ARM key 3-pole | J_ARMSW1 | |
| 1 | DAQ out NOT FITTED | J_DAQ1 | |
| 1 | E-STOP 2x NC | J_ESTOP1 | |
| 1 | FIRE 2NO+1NC | J_FIRESW1 | |
| 1 | RESET momentary | J_RESET1 | |
| 1 | TEST momentary | J_TESTSW1 | |
| 1 | CABLE B 12 cond. | J_UMB1 | |
| 1 | TYPE-C-31-M-12 | J_USB1 | |
| 1 | voltmeter module | J_VM1 |
Show 20 more
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | SRD-12VDC-SL-C | K5 | |
| 1 | MLT-8530 | LS1 | |
| 1 | NTS4001NT1G | Q_BUZZ1 | |
| 1 | 10k | R_BG1 | |
| 1 | 6k8 | R_BG2 | |
| 2 | 5k1 | R_CC1, R_CC2 | |
| 2 | 0R | R_DE1, R_RE1 | |
| 2 | 22R | R_DM1, R_DP1 | |
| 3 | 1k | R_D_ARMED1, R_D_CONT1, R_D_PWR1 | |
| 1 | 220R | R_ISO1 | |
| 1 | 4k7 | R_ISO1_PU1 | |
| 1 | 220R DNP | R_ISO2 | |
| 1 | 4k7 DNP | R_ISO2_PU1 | |
| 1 | 120R | R_TERM1 | |
| 1 | AMS1117-3.3 | U_3V3B1 | |
| 1 | AMS1117-5.0 | U_5VB1 | |
| 1 | SP3485EN-L/TR | U_485 | |
| 1 | 6N137 RX | U_ISO1 | |
| 1 | 6N137 TX DNP | U_ISO2 | |
| 1 | CH340C | U_USB1 |
TALAVERA v1 - Control Station Board design files
The KiCad project lives in the sofi1209/TALAVERA-v1-TestBench repository on GitHub; these links point at the commit this page was built from.
TALAVERA v1 - Control Station Board: common questions
How big is the TALAVERA v1 - Control Station Board?
The TALAVERA v1 - Control Station Board measures 80 × 60 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the TALAVERA v1 - Control Station Board?
51 components, from 40 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.
Where can I download the TALAVERA v1 - Control Station Board design files?
From the sofi1209/TALAVERA-v1-TestBench repository on GitHub, which has the KiCad layout, the schematic and the BOM; the links under Design files point to each one.
Can I use the TALAVERA v1 - Control Station Board design in my own project?
Yes, under the terms of its MIT license, which sofi1209 chose for the repository.