TALAVERA v1 - Bench Board
sofi1209·TALAVERA-v1-TestBench·hardware/talavera-bench/talavera-bench.kicad_pcb
About the TALAVERA v1 - Bench Board
TALAVERA v1 - Bench Board is an open source ESP32 PCB design by sofi1209, published on GitHub under the MIT license. It is a 2-layer board measuring 100 × 80 mm, with 67 components from 37 distinct parts.
Its main chip is the ESP32-DevKitC V4, from the ESP32 family. By type, the board carries 8 capacitors, 4 relays, 2 fuses, 1 IC and 1 connector.
From the project
Static test bench electronics for solid rocket motors. Hardware-only arming, firing and e-stop - no microcontroller on the safety path. Successor to Wirikuta 1.1. Ignitia Rocket Lab.
KiCad projects for the two TALAVERA boards.
Both are flat single sheets with net-label connectivity rather than hierarchical sheets. At this size that is easier to review than nine sub-sheets, and every block is boxed and titled.
The .kicadsch files are produced by tools/genbench.py and tools/genstation.py on top of tools/ksch.py, which reads symbol definitions straight out of the installed KiCad libraries and flattens extends` inheritance. Regenerate with:
Main components on the TALAVERA v1 - Bench Board
TALAVERA v1 - Bench Board bill of materials (BOM)
67 components, 37 distinct parts — part numbers from the project's BOM.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | ESP32-DevKitC V4 | MCU1 | |
| 1 | E-MATCH 5.08mm | P1 | |
| 1 | THD2528-11SD-GF | CARD1 | |
| 1 | 100nF | C_EN1 | |
| 1 | ARMED | D_ARM1 | |
| 7 | 1N4148W | D_CBLK1, D_K1, D_K2, D_K3, D_K3F1, D_K3T1, D_K4 | |
| 1 | FIRING | D_FIRE1 | |
| 1 | logger OK | D_LOG1 | |
| 1 | POWER | D_PWR1 | |
| 1 | TBD crowbar O-17 | D_XBAR1 | |
| 1 | TBD O-17 | F1 | |
| 1 | TBD logger | F2 | |
| 1 | ARMING PLUG | J_ARM1 | |
| 1 | LOAD CELL 5kN | J_LC1 | |
| 1 | 12V 2.6Ah SLA KEYED | J_PWR1 | |
| 1 | RECORD switch | J_REC1 | |
| 1 | CABLE B 12 cond. | J_UMB1 | |
| 4 | SRD-12VDC-SL-C | K1, K2, K3, K4 | |
| 9 | 10k | R_ADCCS1, R_DE1, R_EN1, R_REC1, R_SDCS1, R_SDDET1, R_SDDI1, R_SDDO1 +1 | |
| 2 | 0R FITTED | R_BYP1, R_BYP2 |
Show 17 more
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 2 | 0R DNP | R_BYP3, R_BYP4 | |
| 3 | TBD O-1 | R_CS1, R_TEST1, R_TEST2 | |
| 4 | 1k | R_D_ARM1, R_D_FIRE1, R_D_PWR1, R_LOG1 | |
| 2 | 0R | R_EXC_N1, R_EXC_P1 | |
| 1 | TBD O-2 | R_G1 | |
| 1 | 0R star bond | R_STAR1 | |
| 1 | 120R | R_TERM1 | |
| 1 | 47k | R_V1 | |
| 1 | AMS1117-3.3 | U_3V3 | |
| 1 | AMS1117-5.0 DNP | U_5V1 | |
| 1 | SP3485EN-L/TR | U_485 | |
| 1 | ADS1220IPWR | U_ADC1 | |
| 1 | AD620AN DNP | U_AMP1 | |
| 1 | PC817 | U_CONT1 | |
| 2 | 22uF 25V | C1, C2 | |
| 4 | 100nF | C3, C5, C7, C9 | |
| 2 | 10uF | C6, C10 |
TALAVERA v1 - Bench Board design files
The KiCad project lives in the sofi1209/TALAVERA-v1-TestBench repository on GitHub; these links point at the commit this page was built from.
TALAVERA v1 - Bench Board: common questions
What microcontroller does the TALAVERA v1 - Bench Board use?
The TALAVERA v1 - Bench Board is built around the ESP32-DevKitC V4, from the ESP32 family.
How big is the TALAVERA v1 - Bench Board?
The TALAVERA v1 - Bench Board measures 100 × 80 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the TALAVERA v1 - Bench Board?
67 components, from 37 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.
Where can I download the TALAVERA v1 - Bench Board design files?
From the sofi1209/TALAVERA-v1-TestBench repository on GitHub, which has the KiCad layout, the schematic and the BOM; the links under Design files point to each one.
Can I use the TALAVERA v1 - Bench Board design in my own project?
Yes, under the terms of its MIT license, which sofi1209 chose for the repository.
Can I test firmware for the TALAVERA v1 - Bench Board without the hardware?
Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug ESP32 firmware against it before you order a PCB.
More boards in TALAVERA-v1-TestBench
Similar boards
ESP32
OSO-BOOK-B1
joeycastillo
85 × 115 mm65 parts2LCC-BY-SA-4.08.1kESP32
Powertrain
byrantech
64 × 45.4 mm171 parts4LMIT4.3kESP32
Esp32 minimal
atopile
36.2 × 26.8 mm20 parts2LMIT4.0kESP32
Badge
atopile
56.3 × 39 mm239 parts4LMIT4.0kESP32
Racer
StuckAtPrototype
36 × 50.2 mm70 parts4LApache-2.03.8kESP32
Controller
StuckAtPrototype
29 × 74 mm58 parts4LApache-2.03.8k