FU-3
soggybag·FU-3
About the FU-3 PCB
FU-3 is an open source PCB design by soggybag, published on GitHub. It is a 2-layer board measuring 56 × 85.4 mm, with 68 components from 26 distinct parts.
Other key parts include the TL072. By type, the board carries 29 resistors, 27 capacitors, 6 transistors, 5 diodes and 1 IC.
From the project
An octave / "tripler" distortion with a big two-knob tone stage: the Distort-o-matic XI (Stompboxology Vol. 13 No. 2, project G288; built by the user on two v1 PCBs) reworked: - op-amp preamp in place of the J201 + PNP pair (no hard-to-get JFET, no bias trimmer needed, though a B
An octave / "tripler" distortion with a big two-knob tone stage: the Distort-o-matic XI (Stompboxology Vol. 13 No. 2, project G288; built by the user on two v1 PCBs) reworked: - op-amp preamp in place of the J201 + PNP pair (no hard-to-get JFET, no bias trimmer needed, though a BIAS trim keeps the one-sided clipping option); - HARMONIC: OCT / BOTH / TRIPLE: the original octave-up (full-wave rectifier) and the "Tripple Fuzz" complementary-pair folder (3×), chosen by an SPDT on-off-on; - BASS with an op-amp gyrator in place of the 0.55 H wah inductor (simulated: matches the inductor within 0.5…
Main components on the FU-3
FU-3 bill of materials (BOM)
68 components, 26 distinct parts.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | TL072 | SOIC-8_3.9x4.9mm_P1.27mm | U1 |
| 3 | MMBT3904 | SOT-23 | Q1, Q5, Q6 |
| 3 | S8550 | SOT-23 | Q2, Q3, Q4 |
| 1 | SS14 | D_SMA | D1 |
| 2 | 1N4148W | D_SOD-123 | D2, D3 |
| 2 | 1N5819WS | D_SOD-323 | D4, D5 |
| 2 | 22u | C_0805_2012Metric_Pad1.18x1.45mm_HandSolder | C1, C2 |
| 7 | 100n | C_0805_2012Metric_Pad1.18x1.45mm_HandSolder | C3, C6, C12, C20, C21, C22, C27 |
| 4 | 10u | C_0805_2012Metric_Pad1.18x1.45mm_HandSolder | C4, C10, C11, C26 |
| 1 | 47u | C_1206_3216Metric_Pad1.33x1.80mm_HandSolder | C5 |
| 2 | 100p | C_0805_2012Metric_Pad1.18x1.45mm_HandSolder | C7, C15 |
| 2 | 22p | C_0805_2012Metric_Pad1.18x1.45mm_HandSolder | C8, C23 |
| 1 | 220n | C_0805_2012Metric_Pad1.18x1.45mm_HandSolder | C9 |
| 2 | 10n | C_0805_2012Metric_Pad1.18x1.45mm_HandSolder | C13, C14 |
| 4 | 1u | C_0805_2012Metric_Pad1.18x1.45mm_HandSolder | C16, C18, C19, C24 |
| 1 | 220p | C_0805_2012Metric_Pad1.18x1.45mm_HandSolder | C17 |
| 1 | 47n | C_0805_2012Metric_Pad1.18x1.45mm_HandSolder | C25 |
| 12 | 10k | R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R1, R2, R7, R11, R12, R16, R17, R18 +4 |
| 2 | 4k7 | R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R3, R8 |
| 8 | 1M | R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R4, R6, R13, R14, R15, R20, R21, R25 |
Show 6 more
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | 1k | R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R5 |
| 2 | 33k | R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R9, R10 |
| 1 | 470k | R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R19 |
| 1 | 100k | R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R27 |
| 1 | 47 | R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R28 |
| 1 | 22k | R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R29 |
FU-3 design files
The KiCad project lives in the soggybag/FU-3 repository on GitHub; these links point at the commit this page was built from.
- LayoutFU3.kicad_pcb
- SchematicFU3.kicad_sch
FU-3: common questions
How big is the FU-3 PCB?
The FU-3 measures 56 × 85.4 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the FU-3?
68 components, from 26 distinct parts. The full bill of materials is listed on this page.
Where can I download the FU-3 design files?
From the soggybag/FU-3 repository on GitHub, which has the KiCad layout and the schematic; the links under Design files point to each one.
Can I use the FU-3 design in my own project?
The repository has no license, so all rights stay with soggybag. Use it as a reference, and ask the author before reusing the design.