RGBtoHDMI CDTV Video Slot - Face Plate
About the RGBtoHDMI CDTV Video Slot - Face Plate PCB
RGBtoHDMI CDTV Video Slot - Face Plate is an open source PCB design by solarmon, published on GitHub. It is a 2-layer board measuring 68.1 × 26.6 mm, with 9 components from 5 distinct parts.
By type, the board carries 3 battery holders, 2 diodes, 2 resistors and 1 connector.
From the project
RGBtoHDMI CDTV v2
This is version 2 of the RGBtoHDMI CDTV solution.
Full sized HDMI port DB9 mouse and joystick ports * JP15 toggle switch
This is an RGBtoHDMI solution is based on the original work by hoglet67 and IanSB:
hoglet67: https://github.com/hoglet67/RGBtoHDMI
IanSB: https://github.com/IanSB/RGBtoHDMI
The solution is based on the RGBtoHDMI CPLD based hardware design by LinuxJedi:
RGBtoHDMI CDTV Video Slot - Face Plate bill of materials (BOM)
9 components, 5 distinct parts.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | Conn_02x06_Odd_Even | PinHeader_2x06_P2.54mm_Vertical | CN11 |
| 3 | SW_Push | SW_Tactile_SKHH_Angled | BT1, BT2, BT3 |
| 1 | Conn_01x04 | PinHeader_1x04_P2.54mm_Horizontal | SER1 |
| 2 | LED | PinHeader_1x02_P2.54mm_Vertical | D1, D2 |
| 2 | 4K7 | R_Array_Convex_4x0603 | RN11, RN12 |
RGBtoHDMI CDTV Video Slot - Face Plate design files
The KiCad project lives in the solarmon/RGBtoHDMI-CDTV-v2 repository on GitHub; these links point at the commit this page was built from.
RGBtoHDMI CDTV Video Slot - Face Plate: common questions
How big is the RGBtoHDMI CDTV Video Slot - Face Plate PCB?
The RGBtoHDMI CDTV Video Slot - Face Plate measures 68.1 × 26.6 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the RGBtoHDMI CDTV Video Slot - Face Plate?
9 components, from 5 distinct parts. The full bill of materials is listed on this page.
Where can I download the RGBtoHDMI CDTV Video Slot - Face Plate design files?
From the solarmon/RGBtoHDMI-CDTV-v2 repository on GitHub, which has the KiCad layout and the schematic; the links under Design files point to each one.
Can I use the RGBtoHDMI CDTV Video Slot - Face Plate design in my own project?
The repository has no license, so all rights stay with solarmon. Use it as a reference, and ask the author before reusing the design.
