HardLabs

Smart-LED-WS2812B-Pixel hardware design

SolderedElectronics·Smart-LED-WS2812B-Pixel-hardware-design·CAD/V1.0.0/WS2812B LED Pixel.kicad_pcb

Smart-LED-WS2812B-Pixel hardware design PCB layout, top view — open source board by SolderedElectronics
Simulate this board

About the Smart-LED-WS2812B-Pixel hardware design PCB

Smart-LED-WS2812B-Pixel hardware design is an open source PCB design by SolderedElectronics, published on GitHub under the TAPR-OHL-1.0 license. It is a 2-layer board measuring 10 × 10 mm, with 8 components from 3 distinct parts.

By type, the board carries 1 LED and 1 capacitor.

It belongs with the displays & leds designs in this gallery.

From the project

Hardware design, BOM, gerbers and 3D files for Smart-LED-WS2812B-Pixel designed by Soldered Electronics.

These small LEDs are not just ordinary lights – each is unique because it has a built-in small integrated circuit (IC) that is able to turn on the LED light in 16 million different colors. IC is WS2812 and it uses a single wire that can control thousands of these LEDs. With a little imagination by putting these pixels, you get superior effects with a minimum effort. These lamps are easy to control with Dasduino.

Smart-LED-WS2812B-Pixel hardware design, from the project README
From the project README

Smart-LED-WS2812B-Pixel hardware design bill of materials (BOM)

8 components, 3 distinct parts — part numbers from the project's BOM.

QtyPartRefs
6
PAD_2x1.5
PAD1, PAD2, PAD3, PAD4, PAD5, PAD6
1
WS2812B
LED1
1
100n
C1

Smart-LED-WS2812B-Pixel hardware design design files

The KiCad project lives in the SolderedElectronics/Smart-LED-WS2812B-Pixel-hardware-design repository on GitHub; these links point at the commit this page was built from.

Smart-LED-WS2812B-Pixel hardware design: common questions

How big is the Smart-LED-WS2812B-Pixel hardware design PCB?

The Smart-LED-WS2812B-Pixel hardware design measures 10 × 10 mm, has 2 copper layers and is 1.6 mm thick.

How many components are on the Smart-LED-WS2812B-Pixel hardware design?

8 components, from 3 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.

Where can I download the Smart-LED-WS2812B-Pixel hardware design design files?

From the SolderedElectronics/Smart-LED-WS2812B-Pixel-hardware-design repository on GitHub, which has the KiCad layout, the schematic and the BOM; the links under Design files point to each one.

Can I use the Smart-LED-WS2812B-Pixel hardware design design in my own project?

Yes, under the terms of its TAPR-OHL-1.0 license, which SolderedElectronics chose for the repository.

Similar boards