RGB Spotlight - LED board

somebox·rgb-spotlight·boards/led/led.kicad_pcb

RGB Spotlight - LED board layout, top view — open source board by somebox

About the RGB Spotlight - LED board

RGB Spotlight - LED board is an open source PCB design by somebox, published on GitHub. It is a 2-layer board measuring 50 × 50 mm, with 3 components from 3 distinct parts.

From the project

Status (2026-10-11): v2 schematics and both boards done (DRC clean); one LED channel simulated. Next: v1 bench tests, the housing decision, then the order.

Status (2026-10-11): v2 schematics and both boards done (DRC clean); one LED channel simulated. Next: v1 bench tests, the housing decision, then the order.

Chainable, addressable 3 x 3 W RGB spotlight for 12 V installations: an aluminium LED board and an FR4 driver board in an aluminium cylinder.

- v1 (EasyEDA, one FR4 board) was built but never lit: the PT4115 stages were wired as the wrong kind of buck, and the 74HC04 was unpowered. - v2 is a KiCad restart with two boards.

RGB Spotlight - LED board, from the project README
From the project README

RGB Spotlight - LED board bill of materials (BOM)

3 components, 3 distinct parts — part numbers from the project's BOM.

QtyPartRefs
1
XL-HD2525SURC-A4
RED
LED1
1
XL-HD2525UGC-A4
GREEN
LED2
1
XL-HD2525UBC-A4
BLUE
LED3

RGB Spotlight - LED board design files

The KiCad project lives in the somebox/rgb-spotlight repository on GitHub; these links point at the commit this page was built from.

RGB Spotlight - LED board: common questions

How big is the RGB Spotlight - LED board?

The RGB Spotlight - LED board measures 50 × 50 mm, has 2 copper layers and is 1.6 mm thick.

How many components are on the RGB Spotlight - LED board?

3 components, from 3 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.

Where can I download the RGB Spotlight - LED board design files?

From the somebox/rgb-spotlight repository on GitHub, which has the KiCad layout, the schematic and the BOM; the links under Design files point to each one.

Can I use the RGB Spotlight - LED board design in my own project?

The repository has no license, so all rights stay with somebox. Use it as a reference, and ask the author before reusing the design.

More boards in rgb-spotlight