RGB Spotlight - driver board

somebox·rgb-spotlight·boards/driver/driver.kicad_pcb

RGB Spotlight - driver board layout, top view — open source board by somebox

About the RGB Spotlight - driver board

RGB Spotlight - driver board is an open source PCB design by somebox, published on GitHub. It is a 2-layer board measuring 50 × 50 mm, with 35 components from 20 distinct parts.

Other key parts include the C114581, C347356, 78L05G-AB3-R, 74HC04D,653 and SN74AHCT1G125DCKR. By type, the board carries 9 capacitors, 9 resistors, 7 ICs, 4 diodes, 3 connectors and 3 inductors.

From the project

Status (2026-10-11): v2 schematics and both boards done (DRC clean); one LED channel simulated. Next: v1 bench tests, the housing decision, then the order.

Status (2026-10-11): v2 schematics and both boards done (DRC clean); one LED channel simulated. Next: v1 bench tests, the housing decision, then the order.

Chainable, addressable 3 x 3 W RGB spotlight for 12 V installations: an aluminium LED board and an FR4 driver board in an aluminium cylinder.

- v1 (EasyEDA, one FR4 board) was built but never lit: the PT4115 stages were wired as the wrong kind of buck, and the 74HC04 was unpowered. - v2 is a KiCad restart with two boards.

RGB Spotlight - driver board, from the project README
From the project README

Main components on the RGB Spotlight - driver board

RGB Spotlight - driver board bill of materials (BOM)

35 components, 20 distinct parts — part numbers from the project's BOM.

QtyPartRefs
1
C114581
WS2811
Worldsemi
U1
3
C347356
PT4115
UMW(Youtai Semiconductor Co., Ltd.)
U2, U3, U4
1
78L05G-AB3-R
78L05
UTC(Unisonic Tech)
U5
1
74HC04D,653
74HC04
Nexperia
U6
1
SN74AHCT1G125DCKR
74AHCT1G125
Texas Instruments
U7
1
B3B-XH-A(LF)(SN)
IN 12V/DATA/GND
JST
J1
1
B3B-XH-A(LF)(SN)
OUT 12V/DATA/GND
JST
J2
1
B6B-PH-K-S(LF)(SN)
LED harness
JST
J3
3
C64885
B5819W
MDD(Microdiode Semiconductor)
D1, D2, D3
1
C19077535
SMAJ15A
hongjiacheng
D4
3
FNR6045S680MT
68uH
cjiang (Changjiang Microelectronics Tech)
L1, L2, L3
4
C1525
100nF
Samsung Electro-Mechanics
C1, C2, C3, C4
1
C15850
10uF
Samsung Electro-Mechanics
C5
3
CL31A106KBHNNNE
10uF 50V
Samsung Electro-Mechanics
C6, C7, C8
1
CL31A226KAHNNNE
22uF 25V
Samsung Electro-Mechanics
C9
3
FRL1206FR220TS
0.22R 1%
FOJAN
R1, R2, R3
3
C25900
4.7k
UNI-ROYAL(Uniroyal Elec)
R4, R5, R6
1
C25744
10k
UNI-ROYAL(Uniroyal Elec)
R7
1
C25105
33
UNI-ROYAL(Uniroyal Elec)
R8
1
C25076
100
UNI-ROYAL(Uniroyal Elec)
R10

RGB Spotlight - driver board design files

The KiCad project lives in the somebox/rgb-spotlight repository on GitHub; these links point at the commit this page was built from.

RGB Spotlight - driver board: common questions

How big is the RGB Spotlight - driver board?

The RGB Spotlight - driver board measures 50 × 50 mm, has 2 copper layers and is 1.6 mm thick.

How many components are on the RGB Spotlight - driver board?

35 components, from 20 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.

Where can I download the RGB Spotlight - driver board design files?

From the somebox/rgb-spotlight repository on GitHub, which has the KiCad layout, the schematic and the BOM; the links under Design files point to each one.

Can I use the RGB Spotlight - driver board design in my own project?

The repository has no license, so all rights stay with somebox. Use it as a reference, and ask the author before reusing the design.

More boards in rgb-spotlight