Kineses Board
About the Kineses Board
Kineses Board is an open source AVR/Arduino PCB design by sparkerBCI, published on GitHub. It is a 2-layer board measuring 27.6 × 67.3 mm, with 15 components from 15 distinct parts.
Its main chip is the Arduino_Nano_v3.x, from the AVR/Arduino family. By type, the board carries 8 connectors, 4 capacitors, 2 resistors and 1 module.
From the project
Brain Computer Interface 3-D Printed Prosthetic Hand
This is an Electrical Engineering Final Year Project by Samuel Parker, from the University of Newcastle.
Main components on the Kineses Board
Kineses Board bill of materials (BOM)
15 components, 15 distinct parts — part numbers from the project's BOM.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | Arduino_Nano_v3.x Arduino | Arduino_Nano | A1 |
| 1 | PH1RB-02-UA Power Adam Tech | PinHeader_1x02_P2.54mm_Horizontal | J1 |
| 1 | 68000-203HLF Thumb Amphenol ICC (FCI) | PinHeader_1x03_P2.54mm_Vertical | J2 |
| 1 | 68000-203HLF Index Amphenol ICC (FCI) | PinHeader_1x03_P2.54mm_Vertical | J3 |
| 1 | 68000-203HLF Middle Amphenol ICC (FCI) | PinHeader_1x03_P2.54mm_Vertical | J4 |
| 1 | 68000-203HLF Ring Amphenol ICC (FCI) | PinHeader_1x03_P2.54mm_Vertical | J5 |
| 1 | 68000-203HLF Pinky Amphenol ICC (FCI) | PinHeader_1x03_P2.54mm_Vertical | J6 |
| 1 | 68000-203HLF Wrist Amphenol ICC (FCI) | PinHeader_1x03_P2.54mm_Vertical | J7 |
| 1 | 68000-406HLF HC-05 Amphenol ICC (FCI) | PinHeader_1x06_P2.54mm_Vertical | J8 |
| 1 | EEE-1AA101WR 100u Panasonic Electronic Components | CP_Elec_5x5.3 | C1 |
| 1 | CL05A106MP8NUB8 10u Samsung Electro-Mechanics | C_0402_1005Metric | C2 |
| 1 | CL05F104ZO5NNNC 100n Samsung Electro-Mechanics | C_0402_1005Metric | C3 |
| 1 | CC0402KRX7R7BB103 10n Yageo | C_0402_1005Metric | C4 |
| 1 | RT0402BRD072KL 2K Yageo | R_0402_1005Metric | R1 |
| 1 | RT0402FRE071KL 1K Yageo | R_0402_1005Metric | R2 |
Kineses Board design files
The KiCad project lives in the sparkerBCI/FYP repository on GitHub; these links point at the commit this page was built from.
Kineses Board: common questions
What microcontroller does the Kineses Board use?
The Kineses Board is built around the Arduino_Nano_v3.x, from the AVR/Arduino family.
How big is the Kineses Board?
The Kineses Board measures 27.6 × 67.3 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the Kineses Board?
15 components, from 15 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.
Where can I download the Kineses Board design files?
From the sparkerBCI/FYP repository on GitHub, which has the KiCad layout and the BOM; the links under Design files point to each one.
Can I use the Kineses Board design in my own project?
The repository has no license, so all rights stay with sparkerBCI. Use it as a reference, and ask the author before reusing the design.
Can I test firmware for the Kineses Board without the hardware?
Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug AVR/Arduino firmware against it before you order a PCB.
More boards in FYP
Similar boards
AVR/ArduinoRedox keyboard
mattdibi
162.2 × 126.5 mm77 parts2LMIT2.0k
AVR/ArduinoModuleV450
stuartpittaway
30 × 61.4 mm39 parts2LCC-BY-NC-4.01.1k
AVR/ArduinoV4
30 × 50 mm38 parts2LCC-BY-NC-4.01.1k
AVR/ArduinoDiscipline
coseyfannitutti
304.9 × 122.8 mm170 parts2LCC-BY-NC-4.01.0k
AVR/ArduinoMegadesk
gcormier
41.7 × 32.2 mm23 parts2LGPL-3.0818
AVR/ArduinoEasyduino Atmega Nano
Hanqaqa
43.4 × 18 mm30 parts4LCERN-OHL-P-2.0746