SparkFun RGB CBI

sparkfun·SparkFun_RGB_CBI·Hardware/SparkFun_RGB_CBI_Example.kicad_pcb

SparkFun RGB CBI PCB layout, top view — open source board by sparkfun

About the SparkFun RGB CBI PCB

SparkFun RGB CBI is an open source PCB design by sparkfun, published on GitHub under the MIT license. It is a 2-layer board measuring 42.6 × 20.3 mm, with 14 components from 5 distinct parts.

By type, the board carries 4 diodes, 4 capacitors, 1 IC and 1 connector.

It belongs with the displays & leds designs in this gallery.

From the project

An example layout for the SparkFun RGB CBI right angle indicator LED

SparkFun RGB Addressable CBI LED 5mm - Right Angle ========================================

SparkFun RGB Addressable CBI LED 5mm - Right Angle (COM-23649)

This is a right angle 5mm addressable LED. It sounds boring, but at the time of writing, this is the first one in the world.

If you've ever tried to get a project into an enclosure, you know what a challenge it can be. Connectors are fairly straightforward. Oddly, getting a clean-looking, clear indicator to the outside world is trickier.

SparkFun RGB CBI, from the project README
From the project README

SparkFun RGB CBI bill of materials (BOM)

14 components, 5 distinct parts.

QtyPartRefs
1
~
U1
1
Conn_01x04
J1
4
Stand_off
ST1, ST2, ST3, ST4
4
WS2812B_CBI
D1, D2, D3, D4
4
0.1uF
C1, C2, C3, C4

SparkFun RGB CBI design files

The KiCad project lives in the sparkfun/SparkFun_RGB_CBI repository on GitHub; these links point at the commit this page was built from.

SparkFun RGB CBI: common questions

How big is the SparkFun RGB CBI PCB?

The SparkFun RGB CBI measures 42.6 × 20.3 mm, has 2 copper layers and is 1.6 mm thick.

How many components are on the SparkFun RGB CBI?

14 components, from 5 distinct parts. The full bill of materials is listed on this page.

Where can I download the SparkFun RGB CBI design files?

From the sparkfun/SparkFun_RGB_CBI repository on GitHub, which has the KiCad layout and the schematic; the links under Design files point to each one.

Can I use the SparkFun RGB CBI design in my own project?

Yes, under the terms of its MIT license, which sparkfun chose for the repository.

Similar boards