HardLabs

SparkFun RTK Facet - Display SD

sparkfun·SparkFun_RTK_Facet·Hardware/Display/KiCad/SparkFun RTK Facet - Display SD.kicad_pcb

SparkFun RTK Facet - Display SD PCB layout, top view — open source board by sparkfun

About the SparkFun RTK Facet - Display SD PCB

SparkFun RTK Facet - Display SD is an open source PCB design by sparkfun, published on GitHub under the MIT license. It is a 2-layer board measuring 49.5 × 22 mm, with 21 components from 17 distinct parts.

Other key parts include the OLED_0.66". By type, the board carries 8 capacitors, 5 resistors, 4 connectors, 1 IC, 1 jumper and 1 switch.

It belongs with the rf & radio, displays & leds and iot & wireless designs in this gallery.

From the project

The hardware and enclosure for the popular centimeter level RTK Facet GNSS receiver with built in display.

SparkFun RTK Facet ========================================

The SparkFun RTK Facet and RTK Facet L-Band are your one stop shop for high precision geolocation and surveying needs. For basic users, it’s incredibly easy to get up and running and for advanced users, the RTK Facet is a flexible and powerful tool. With just a few minutes of setup, the RTK Facet is one of the fastest ways to take centimeter grade measurements. By connecting your phone to the RTK Facet over Bluetooth, your phone can act as the radio link to provide correction data as well as receive the NMEA output from the device.…

SparkFun RTK Facet - Display SD, from the project README
From the project README

Main components on the SparkFun RTK Facet - Display SD

OLED_0.66"

SparkFun RTK Facet - Display SD bill of materials (BOM)

21 components, 17 distinct parts — part numbers from the project's BOM.

QtyPartRefs
1
OLED_0.66"
U1
1
FPC_12_0.5MM_BACKFLIP
Conn_01x12_FPC_0.5mm
J1
1
C720505
microSD
J2
1
I2C
J3
1
Conn_01x06_FPC_1.0mm
J4
1
~
JP3
1
SMD_5.2x5.2mm_h2.5mm
SW1
1
C125106
Green
D1
1
2.2UF
2.2uF
C1
2
1.0UF
1.0uF
C2, C3
3
1.0UF
1.0uF
C4, C6, C7
1
4.7UF
4.7uF
C5
1
0.1UF
0.1uF
C16
1
390K
390k
R1
2
10K
10k
R2, R3
1
100K
10k
R4
1
1k
R5

SparkFun RTK Facet - Display SD design files

The KiCad project lives in the sparkfun/SparkFun_RTK_Facet repository on GitHub; these links point at the commit this page was built from.

SparkFun RTK Facet - Display SD: common questions

How big is the SparkFun RTK Facet - Display SD PCB?

The SparkFun RTK Facet - Display SD measures 49.5 × 22 mm, has 2 copper layers and is 1.6 mm thick.

How many components are on the SparkFun RTK Facet - Display SD?

21 components, from 17 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.

Where can I download the SparkFun RTK Facet - Display SD design files?

From the sparkfun/SparkFun_RTK_Facet repository on GitHub, which has the KiCad layout, the schematic and the BOM; the links under Design files point to each one.

Can I use the SparkFun RTK Facet - Display SD design in my own project?

Yes, under the terms of its MIT license, which sparkfun chose for the repository.

More boards in SparkFun_RTK_Facet

Similar boards