Screw terminal interface
About the Screw terminal interface PCB
Screw terminal interface is an open source PCB design by speeduino, published on GitHub. It is a 2-layer board measuring 40 × 100 mm, with 7 components from 4 distinct parts.
From the project
Official Speeduino hardware designs
These resellers all contribute a portion of sales back to the project to allow for continued development to take place and we encourage sales through them whenever possible.
Of course, being open source, you are free to use the design files provided here to create your own hardware!
This project exists thanks to all the people who contribute, both in terms of code and testing provided. If you'd like to get involved, please have a read through Contributing and then jump on Discord to discuss things further
Screw terminal interface bill of materials (BOM)
7 components, 4 distinct parts — part numbers from the project's BOM.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 4 | Screw_Terminal_1x05 | TerminalBlock_Phoenix_PT-1,5-5-5.0-H_1x05_P5.00mm_Horizontal | J1, J2, J5, J6 |
| 1 | 282836-2 Screw_Terminal_1x05 | TerminalBlock_Phoenix_PT-1,5-5-5.0-H_1x05_P5.00mm_Horizontal | J3 |
| 1 | 571-5103308-8 Screw_Terminal_1x05 | TerminalBlock_Phoenix_PT-1,5-5-5.0-H_1x05_P5.00mm_Horizontal | J4 |
| 1 | CONN_02X20 | IDC_Header_Straight_40pins | P1 |
Screw terminal interface design files
The KiCad project lives in the speeduino/Hardware repository on GitHub; these links point at the commit this page was built from.
Screw terminal interface: common questions
How big is the Screw terminal interface PCB?
The Screw terminal interface measures 40 × 100 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the Screw terminal interface?
7 components, from 4 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.
Where can I download the Screw terminal interface design files?
From the speeduino/Hardware repository on GitHub, which has the KiCad layout and the BOM; the links under Design files point to each one.
Can I use the Screw terminal interface design in my own project?
The repository has no license, so all rights stay with speeduino. Use it as a reference, and ask the author before reusing the design.
More boards in Hardware
ESP32DropBear
116.1 × 98 mm196 parts2LNo license281
AVR/ArduinoNA6 v1.3
100 × 100 mm145 parts2LNo license281
AVR/Arduino0.4
100 × 100 mm142 parts2LNo license281
AVR/Arduino0.4
100 × 100 mm141 parts2LNo license281
AVR/ArduinoV0.4.4b
100 × 100 mm138 parts2LNo license281
AVR/Arduino0.4
100 × 100 mm127 parts2LNo license281
Dual Variable Reluctance MAX9926 mode A2
19.7 × 19.7 mm18 parts2LNo license281
MAP Card
19.8 × 15.9 mm5 parts2LNo license281
48-pin breakout
20.6 × 81 mm4 parts2LNo license281