Noise
spielhuus·elektrophon·src/resonanz/main/main.kicad_pcb
About the Noise PCB
Noise is an open source PCB design by spielhuus, published on GitHub. It is a 2-layer board measuring 80.9 × 111.8 mm, with 96 components from 19 distinct parts.
Other key parts include the LM1458 and TL072. By type, the board carries 48 resistors, 28 capacitors, 9 ICs, 8 diodes and 3 connectors.
From the project
Modular analog electro acoustic noise machine.
nothing special about the patching of this module.
#1-#4 (left) individual input of the channels in input for all channels #1-#4 (bottom) individual output of the channels frequency frquency of the channel resonance resonance of the channel volume volume for mixed out signal out** mixed out signal
the [CGS30][1] resonant band pass filter from ken stone. jürgen haibles voltage controlled [resonator][2]. * scott stites version of a [resonant filter][3].

Main components on the Noise
Noise bill of materials (BOM)
96 components, 19 distinct parts — part numbers from the project's BOM.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 8 | LM1458 | DIP-8_W7.62mm_Socket | U1, U3, U4, U5, U6, U7, U8, U9 |
| 1 | TL072 | DIP-8_W7.62mm_Socket | U2 |
| 1 | CONN_01X26_FEMALE Conn_01x26_Female | PinHeader_1x26_P2.54mm_Vertical | J1 |
| 1 | IDC Header | IDC-Header_2x05_P2.54mm_Vertical | J2 |
| 1 | CONN_01X05_FEMALE Conn_01x05_Female | PinHeader_1x05_P2.54mm_Vertical | J3 |
| 8 | 1N4148 | D_DO-35_SOD27_P3.81mm_Vertical_KathodeUp | D1, D2, D3, D4, D5, D6, D7, D8 |
| 8 | 22n polyester | C_Rect_L7.2mm_W2.5mm_P5.00mm_FKS2_FKP2_MKS2_MKP2 | C1, C2, C3, C4, C5, C6, C23, C24 |
| 2 | 10U 10u | CP_Radial_D5.0mm_P2.50mm | C7, C8 |
| 18 | 0.1U 0.1u | C_Rect_L4.0mm_W2.5mm_P2.50mm | C9, C10, C11, C12, C13, C14, C15, C16 +10 |
| 8 | 47K 47k | R_Axial_DIN0207_L6.3mm_D2.5mm_P10.16mm_Horizontal | R1, R2, R18, R19, R20, R21, R38, R39 |
| 4 | 47K 47k | R_Axial_DIN0207_L6.3mm_D2.5mm_P2.54mm_Vertical | R3, R22, R23, R40 |
| 6 | 100K 100k | R_Axial_DIN0207_L6.3mm_D2.5mm_P10.16mm_Horizontal | R4, R5, R6, R12, R15, R48 |
| 4 | 10K 10k | R_Axial_DIN0207_L6.3mm_D2.5mm_P10.16mm_Horizontal | R7, R24, R25, R41 |
| 1 | 100K 100k | R_Axial_DIN0207_L6.3mm_D2.5mm_P2.54mm_Vertical | R8 |
| 8 | 10K 10k | R_Axial_DIN0207_L6.3mm_D2.5mm_P2.54mm_Vertical | R9, R10, R26, R27, R28, R29, R42, R43 |
| 4 | 15K 15k | R_Axial_DIN0207_L6.3mm_D2.5mm_P10.16mm_Horizontal | R11, R30, R31, R44 |
| 4 | 6K8 6k8 | R_Axial_DIN0207_L6.3mm_D2.5mm_P2.54mm_Vertical | R13, R32, R33, R45 |
| 8 | 680 | R_Axial_DIN0207_L6.3mm_D2.5mm_P10.16mm_Horizontal | R14, R17, R34, R35, R36, R37, R46, R47 |
| 1 | 1k | R_Axial_DIN0207_L6.3mm_D2.5mm_P10.16mm_Horizontal | R16 |
Noise design files
The KiCad project lives in the spielhuus/elektrophon repository on GitHub; these links point at the commit this page was built from.
Noise: common questions
How big is the Noise PCB?
The Noise measures 80.9 × 111.8 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the Noise?
96 components, from 19 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.
Where can I download the Noise design files?
From the spielhuus/elektrophon repository on GitHub, which has the KiCad layout, the schematic and the BOM; the links under Design files point to each one.
Can I use the Noise design in my own project?
The repository has no license, so all rights stay with spielhuus. Use it as a reference, and ask the author before reusing the design.