Adafruit SharpMemoryDisplay
spilliams·programmable-remote·ref/Adafruit_SharpMemoryDisplay/Adafruit_SharpMemoryDisplay.kicad_pcb
About the Adafruit SharpMemoryDisplay PCB
Adafruit SharpMemoryDisplay is an open source PCB design by spilliams, published on GitHub under the Unlicense license. It is a 16-layer board measuring 40 × 39 mm, with 16 components from 11 distinct parts.
Other key parts include the LS013B4DN04, 74HC4050D and MCP1824T-3302E/OT. By type, the board carries 5 ICs, 5 capacitors, 3 resistors, 2 inductors and 1 jumper.
From the project
This repo contains all files related to my project to make a programmable infrared remote control.
This repo contains all files related to my project to make a programmable infrared remote control.
I'm using this project as a way to get deeper into embedded programming. It should suffice as a companion project while I read Elecia White's Making Embedded Systems.
Main components on the Adafruit SharpMemoryDisplay
Adafruit SharpMemoryDisplay bill of materials (BOM)
16 components, 11 distinct parts.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | LS013B4DN04 | FPC_10PIN_52892-1095 | IC1 |
| 1 | 74HC4050D | SOIC16 | U1 |
| 1 | MCP1824T-3302E/OT | SOT23-5 | U2 |
| 1 | — | LOGIC_5VREADY_5MM | U$19 |
| 1 | — | ADAFRUIT_5MM | U$29 |
| 1 | — | 1X09_ROUND_70 | JP1 |
| 2 | — | _0805 | FB1, FB2 |
| 1 | 0.1µF | _0805 | C1 |
| 2 | 1µF | _0805 | C2, C3 |
| 2 | 10µF | _0805 | C4, C5 |
| 3 | 10K | _0805 | R1, R2, R3 |
Adafruit SharpMemoryDisplay design files
The KiCad project lives in the spilliams/programmable-remote repository on GitHub; these links point at the commit this page was built from.
Adafruit SharpMemoryDisplay: common questions
How big is the Adafruit SharpMemoryDisplay PCB?
The Adafruit SharpMemoryDisplay measures 40 × 39 mm, has 16 copper layers and is 1.6 mm thick.
How many components are on the Adafruit SharpMemoryDisplay?
16 components, from 11 distinct parts. The full bill of materials is listed on this page.
Where can I download the Adafruit SharpMemoryDisplay design files?
From the spilliams/programmable-remote repository on GitHub, which has the KiCad layout and the schematic; the links under Design files point to each one.
Can I use the Adafruit SharpMemoryDisplay design in my own project?
Yes, under the terms of its Unlicense license, which spilliams chose for the repository.