8 open source boards using the 74HC4050D

Real designs built with the 74HC4050D, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.

8 boardsClear filters|Most starred

How designs wire the 74HC4050D

Read from the KiCad layouts of 8 open source designs, one per repository: what each pin of the 74HC4050D connects to, and the resistors, capacitors and other passives placed on it.

  • The NC@1 pin is left unconnected on 8 of 8 designs.
  • The NC@2 pin is left unconnected on 8 of 8 designs.
  • The 6Y pin is left unconnected on 6 of 8 designs (a signal on 2).
  • The 5Y pin is left unconnected on 5 of 8 designs (a signal on 3).
VCCpin 1Connected to: 3.3V 100%
  • Decoupling capacitor on 50% · 100 nF (3), 10 µF (1)
GNDpin 8Connected to: GND 100%
5Ypin 12Connected to: Not connected 63% · a signal 38%
NC@1pin 13Connected to: Not connected 100%
6Ypin 15Connected to: Not connected 75% · a signal 25%
NC@2pin 16Connected to: Not connected 100%

10 more pins vary from design to design. Connections count pins, parts count designs; values in brackets are how many parts had that value. Designs read include Tubender PCB by smvumbaco, Core-Board by calstar, Coleco adam ade pro embed shield by djtersteegc and Adafruit 0.96in 160x80 TFT Display by ihmnelson.

The 74HC4050D in open source designs

The gallery holds 8 open source boards using the 74HC4050D from 8 GitHub repositories; a typical one measures about 47.6 × 46.5 mm and carries around 25 components.

50% are two-layer designs, the rest use four layers or more, and 50% carry an open source license.

The most starred is Tubender PCB by smvumbaco.

Microcontrollers on boards using the 74HC4050D

74HC4050D: common questions

Where can I find a 74HC4050D reference design?

Each of the 8 boards on this page is a real design using the 74HC4050D. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.

How is the 74HC4050D NC@1 pin connected?

The NC@1 pin is left unconnected on 8 of 8 designs. Counted from the KiCad layouts of 8 open source designs using the 74HC4050D.

How is the 74HC4050D NC@2 pin connected?

The NC@2 pin is left unconnected on 8 of 8 designs. Counted from the KiCad layouts of 8 open source designs using the 74HC4050D.

How is the 74HC4050D 6Y pin connected?

The 6Y pin is left unconnected on 6 of 8 designs (a signal on 2). Counted from the KiCad layouts of 8 open source designs using the 74HC4050D.

Which microcontrollers do boards using the 74HC4050D use?

Most are built on ESP32 (2).

How big is a typical board using the 74HC4050D?

The median is 47.6 × 46.5 mm, and 50% are two-layer designs.

What is the most popular open source board using the 74HC4050D?

By GitHub stars, Tubender PCB by smvumbaco, with 2 stars.

Can I simulate one of these boards using the 74HC4050D before building it?

Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.

Browse boards by part